User manual ZENITH DVB318 OPERATING GUIDE

[. . . ] DV7832NXS_Zenith Installation and Operating Guide | Warranty Model Number | DVB318 | DVD Player © Copyright 2003, Zenith Electronics Corporation CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: To reduce the risk of electric shock, do not remove the cover or back of this product. Refer servicing to qualified service personnel. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. [. . . ] Higher rated scenes Enter the code of the country/area whose standards were used to rate the DVD video disc, based on the list in the reference chapter. Shift the cursor using B button and select the second character using v / V buttons. Press SELECT/ENTER to confirm your 15 Installation and Setup Operation DVD or Video CD Playback Playback Setup 1. Turn on the TV and select the video input source connected to the DVD player. Turn on the audio system (if applicable) and select the input source connected to the DVD player. Press OPEN/CLOSE to open the disc tray and load your chosen disc in the tray, with the playback side down. In some cases, the disc menu might appear instead: DVD General Features Note: Unless stated otherwise, all operations described use the remote control. Changing TITLEs DVD When a disc has more than one title, you can move to another title. In Stop mode, press DISPLAY then the appropriate number (0-9) or use b / B to select to another title. Changing CHAPTERs/TRACKs DVD VCD If a title on a disc has more than one chapter or a disc has more than one track, you can select to another chapter/track as follows: · Press SKIP/SCAN . or > during playback to select the next chapter/track or to return to the beginning of the current chapter/track. To go directly to any chapter during DVD playback, press DISPLAY and use v / V to select the chapter/track icon. Then, key in the chapter/track number or use b / B. DVD VCD Use the b B v V buttons to select the title/chapter you want to view, then press SELECT/ENTER to start. Press TITLE or MENU to return to the menu display. VCD · · Use the number buttons to select the track you want to view and press RETURN to return to the menu display. Notes · If parental control is active and the disc is not within the rating settings, you must input the password. Your player does not play discs that have a region code different from your player. Tip: You can also select the search speed by rotating and holding the SHUTTLE ring during playback. The search speed is changed when you rotate and hold SHUTTLE ring at a new position. · 16 Still Picture and Frame-by-Frame Playback DVD VCD Notes: · On a Video CD with PBC, you must set PBC to Off on the Setup menu to use the repeat function (See "PBC" on page 14). If you press SKIP/SCAN (>) once during Repeat Chapter (Track) playback, the repeat playback stops. DVD VCD 1. Rotate and hold SHUTTLE ring forward or reverse to select the required speed: 1/16, 1/8, 1/4 or 1/2 backward or forward. "A - B" appears briefly on the TV screen and the repeat sequence begins. Tip: By pressing SKIP/SCAN > during random playback, the unit selects another title (track) and resumes random playback. [. . . ] This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U. S. Territories. WARRANTY PERIOD: LABOR: 90 DAYS from the Date of Purchase. Repaired or Replacement Unit is warranted for the remaining period of the original warranty. Call 1-877-993-6484 for instructions on getting the defective unit replaced. [. . . ]