User manual YAMAHA RX-V396RDS
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual YAMAHA RX-V396RDS. We hope that this YAMAHA RX-V396RDS user guide will be useful to you.
You may also download the following manuals related to this product:
YAMAHA RX-V396RDS (2757 ko)
YAMAHA RX-V396RDS RS 232 PROTOKOLL F X V396RDS (23 ko)
YAMAHA RX-V396RDS annexe 1 (2495 ko)
Manual abstract: user guide YAMAHA RX-V396RDS
Detailed instructions for use are in the User's Guide.
[. . . ] GB
RX-V396RDS
Natural Sound AV Receiver Ampli-tuner audio-vidéo
OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1. Install this unit in a cool, dry, clean place -- away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. To prevent fire or electrical shock, do not expose the unit to rain or water. When moving the unit, first disconnect the power cord and then the wires connected to other component. [. . . ] If, however, the power cord is disconnected from the AC power outlet or the power is cut for more than one week, the memory will be erased. If so, store the stations again by using preset tuning methods.
English
27
TUNING
Manual Preset Tuning
You can also store up to 40 stations (5 groups x 8 stations) manually.
To Recall a Preset Station
You can recall any desired station simply by selecting the preset station number with which it was stored. You can also recall a preset station with the remote control.
+
+
L
R
+
+
L
R
3
4
2, 5
2
1
2
1
1 2
Tune in to the desired station. The "MEMORY" indicator flashes for about five seconds.
Flashes
3
Press A/B/C/D/E repeatedly to select the desired group (A to E) of preset stations before the "MEMORY" indicator goes off. The selected group appears on the display.
1
Press A/B/C/D/E to select the required group of preset stations. Make sure that " z " appears on the display.
or Front panel Remote control
4
Press PRESET/TUNING h or l to select a preset station number (1 to 8) with which you want to store the station before the "MEMORY" indicator goes off. Press h to select a higher preset station number and l to select a lower preset station number. The displayed station has been stored as the preset group and number you have selected, and the reception band and frequency appear on the display.
2
Press PRESET/TUNING h or l (or PRESET +/) to select a preset station number (1 to 8). The preset group and number appear on the display along with the reception band, frequency and signal strength information.
or Front panel Remote control
5
6
Repeat steps 1 to 5 to store other stations.
Notes
· A new setting can be stored in place of the former one. · The reception mode (stereo or monaural) is stored along with the station frequency.
28
TUNING
Exchanging Preset Stations
You can exchange the assignment of two preset stations with each other. INTRODUCTION
s Example: If you want to exchange preset station "E1" with "A5".
2, 4
PREPARATION
+
+
L
R
1 2
Recall preset station "E1". Refer to the procedure in the section "To Recall a Preset Station" on page 28. "E1" and the "MEMORY" indicator flash.
BASIC OPERATION
Flashes
3
Recall preset station "A5" by using the buttons on the front panel. "A5" and the "MEMORY" indicator flash.
Flashes
ADVANCED OPERATION
4
Press (PRESET/TUNING) EDIT again. The display shows the exchange of stations has been completed.
APPENDIX English
29
RECEIVING RDS STATIONS
Radio Data System (RDS) is a data transmission system by FM stations in many countries. Stations using this system transmit an inaudible stream of data in addition to the normal radio signal. RDS data contains various information such as PI (Program Identification), PS (Program Service name), PTY (Program Type), RT (Radio Text), CT (Clock Time), EON (Enhanced Other Networks), etc. The RDS function is carried out among the network stations.
Changing the RDS Mode
The four modes are available in this unit for displaying RDS data. When an RDS station is being received, PS, PTY, RT and/or CT that correspond to the RDS data services offered by the station light up on the display. Press RDS MODE/ FREQ repeatedly to change the display mode among the RDS data offered by the transmitting station in the order shown below. Illumination of the red indicator next to the RDS mode indicator shows that the corresponding RDS mode is now selected.
Description of RDS Data
This unit can receive PI, PS, PTY, RT, CT, and EON data when receiving RDS broadcasting stations.
Notes
· When an RDS station is being received, do not press RDS MODE/FREQ until one or more RDS mode indicators light up on the display. If you press the button before the indicators light up on the display, the mode cannot be changed. [. . . ] 32 PTY SEEK-functie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
S
SET MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 SLEEP-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 STANDBY/ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA RX-V396RDS
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA RX-V396RDS will begin.