User manual YAMAHA DTX502

[. . . ] DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. , is used, please observe all safety markings and instructions that accompany the accessory product. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. [. . . ] € This training can be set either to mute pads when they are not played in time or to always play pads whenever they are struck. For details, see the description of the Ignore Timing page from Menu Mode (page 72). ρ Selecting which practice rhythms to use Using the following procedure, you can select which of the seven practice rhythms you wish to use. Similarlytofor the other the rhythms, use the [<]/[>] buttons navigate to corresponding pages, and turn the Data Dial to select whether to play or skip them. Page TRNG2 TRNG3 TRNG4 TRNG5 3 Rhythm (É) (Ñ) ( ÑA) (è) Page TRNG6 TRNG7 TRNG8 Rhythm 3 ( èA) (ê) 6 ( êB) DTX502 Owner’s Manual 45 Basic Techniques Practicing in Training Mode  Changing the number of measures after which the rhythm changes the training menu 1. With “05:Change Up” selected on to navigate to the page (TRNG1), use the [>] button TRNG9 page. Pad Gate In Pad Gate training, the pads will only produce a sound when your drumming precisely matches a practice drum pattern. When you have finished training, your score will be displayed on-screen. In addition, you will be able to view the individual hit ratios for each of the drum parts. Hold down the [SHIFT] button and press the [KIT] button to access Training Mode. The [ ] button will flash, indicating that the drum module is on standby to start training. € In addition, the pads will only produce a sound when you play the same drum pattern as in the song. Use the [<]/[>] buttons to view the individual hit ratios for the hi-hat, snare, kick, toms, and cymbals—that is, the percentage of times they were played in time and matching the drum pattern in the song. hit ratio 0% ¢¢¢¢¢ HiHat HSKtC Hi-hat Snare Toms Kick Cymbals Currently selected drum part 46 DTX502 Owner’s Manual Basic Techniques Practicing in Training Mode 6. NOTE • If you wish to adjust the duration of training, see the description of the Timer page from Menu Mode (page 72). € If you wish to adjust the difficulty level for this training, see the description of the Difficulty Level page from Menu Mode (page 72). € This training can be set either to mute pads when they are not played in time or to always play pads whenever they are struck. For details, see the description of the Ignore Timing page from Menu Mode (page 72). € You can set which groups of pads the drum module should consider when deciding whether or not you are playing the same drum pattern as in the song. For details, see the description of the Pad Gate Group page from Menu Mode (page 72). € If looping (page 28) is turned off for the selected song, training will finish when the song plays once to the end. € You can also view your hit ratios for individual drum parts after training has ended. [. . . ] )  How do I reset all of the drum module’s parameters to the settings they had when I last turned it on?)  How do I stop the drum module turning off before I’m finished using it?€ Set the parameter on the Auto Power-Off page (System8) from Menu Mode to “off” (See page 75. € If the song you selected contains no data, the drum module will not be able to play it. [. . . ]