User manual XTANT A410 TECHNICAL DATA REPORT
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual XTANT A410. We hope that this XTANT A410 user guide will be useful to you.
 |
XTANT A410 TECHNICAL DATA REPORT: Download the complete user guide (37 Ko) |
Manual abstract: user guide XTANT A410TECHNICAL DATA REPORT
Detailed instructions for use are in the User's Guide.
[. . . ] This supplied module is designed to be plugged into any accessory port tower on the 302a amplifier. [. . . ] A 90 Hz SIP is factory installed and an additional 13 crossover frequency SIPs are available from your Authorized Xtant Dealer. Adding Accessory Modules: The 302a is equipped with three accessory docking ports. Two ports are dedicated to the amplifier and are labeled Amp Vert/Horiz Acc. Be sure to observe the orientation of the "keyed" right angled header connector before attempting to insert the A410 onto a port tower.
Applications: The CM 12H filter module may be used alone or in combination with other Xtant modules. Here are a few examples of how the CM 12H Module may be applied: High Pass Amp: A410 in Amp Vert. Port 24 dB High Pass for Amp: 2 A410 set at same frequency in Amp Vert. [. . . ] Port 24 dB High Pass for Amp: 2 A410 set at same frequency in Amp Vert. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE XTANT A410
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual XTANT A410 will begin.