User manual WHIRLPOOL WMT502 PRODUCT FICHE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WMT502. We hope that this WHIRLPOOL WMT502 user guide will be useful to you.


WHIRLPOOL WMT502 PRODUCT FICHE: Download the complete user guide (52 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WMT502 (1630 ko)
   WHIRLPOOL WMT502 OPLYSNINGSSKEMA (54 ko)
   WHIRLPOOL WMT502 PRODUCTINFORMATIEBLAD (284 ko)

Manual abstract: user guide WHIRLPOOL WMT502PRODUCT FICHE

Detailed instructions for use are in the User's Guide.

[. . . ] Same as the last rinse and the final spin in the “Cotton” programme. 5019 412 10111 CONSUMPTION DATA Programme White Cotton / Hygienic+ Cotton Cotton + Eco** Cotton SuperEco Synthetics Synthetics Delicates Daily load Quick wash Wool Handwash Lingerie Temperature (°C) 95 60 60 40 60 60 40 40 40 30 40 40 30 Load (kg) 5. €¢ If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during the rinse. START DELAY The “Start delay” button allows the user to run the machine at his convenience, for example at night when electricity is cheaper. [. . . ] • Start the programme (see “Progremme Start”). The indication lamp over the “Start delay” button lights up and goes off when the programme starts. €¢ Once having pressed the “Start/Pause” button, the countdown of the time delay begins. The time delay indication on the display disappears when the programme starts and is replaced by the remaining time. €¢ After the “Start/Pause” button has been pressed, the number of hours preselected can be reduced by pressing again the “Start delay” button. Before you press the “Start/Pause” button: • Turn the programme selector to another position or press the “Reset” button. After having pressed the “Start/Pause” button: • Press the “Reset” button for at least 3 second. PROGRAMME START Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. *** The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable at that time. Load the machine, close the drum doors and check that they are properly locked. Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instruction for Use, and close the lid. The time display shows the duration of the chosen programme (in hours and minutes), and the lamp next to the “Start Pause” button flashes. The spin speed indicated can be altered by pressing the “Variable spin” button. SELECT THE DESIRED OPTION(S) Selecting or deselecting an option can be done at any time during the programme. The option will be applied as long as the corresponding programme phase has not been executed yet. €œEco” button • With a modified temperature profile and a slightly prologned washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved. [. . . ] €œPrewash” button • Only for heavily soiled loads (for example sand, granular dirt) sensible. €¢ Do not use liquid detergent for the main wash when activating the prewash option. €œEasy ironing” button • Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier. €¢ Increases the water quantity and the clothes are spun very gently. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WMT502




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WMT502 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.