User manual WHIRLPOOL WGD70HEBW INSTALLATION GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WGD70HEBW. We hope that this WHIRLPOOL WGD70HEBW user guide will be useful to you.


WHIRLPOOL WGD70HEBW INSTALLATION GUIDE: Download the complete user guide (8802 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WGD70HEBW (6320 ko)
   WHIRLPOOL WGD70HEBW (6320 ko)
   WHIRLPOOL WGD70HEBW DIMENSION GUIDE (327 ko)
   WHIRLPOOL WGD70HEBW VENTILATION SPECIFICATION (1518 ko)

Manual abstract: user guide WHIRLPOOL WGD70HEBWINSTALLATION GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] Com INSTALLATION NOTES Date of purchase:__________________________________ Date of installation:________________________________ Installer:_________________________________________ Model number:____________________________________ Serial number:____________________________________ NOTES CONCERNANT L’INSTALLATION Date d’achat:_______________________________________ Date d’installation:___________________________________ Installateur:________________________________________ Numéro de modéle:__________________________________ Numéro de série:____________________________________ W10573707B W10573708B-SP DRYER SAFETY 2 IMPORTANT: When discarding or storing your old clothes dryer, remove the door. 3 INSTALLATION REQUIREMENTS TOOLS AND PARTS Gather the required tools and parts before starting installation. Parts supplied (all models): Tools needed for all installations: Leveling legs (4) Parts supplied (steam models): Flat-blade screwdriver #2 Phillips screwdriver 1/4" and 5/16" nut driver (recommended) Level “Y” connector Parts package is located in dryer drum. NOTE: Do not use leveling legs supplied with dryer if installing with a pedestal or a stack kit. [. . . ] : An individual manual shut-off valve must be installed within six (6) ft. 8 m) of the dryer in accordance with the National Fuel Gas Code, ANSI Z223. In Canada: An individual manual shut-off valve must be installed in accordance with the B149. It is recommended that an individual manual shut-off valve be installed within six (6) ft. E C A 11/2" (38 mm) 3/8" NPT dryer gas pipe *5 3/4" (146 mm) * NOTE: If the dryer is mounted on a pedestal, the gas pipe height must be an additional 10" (254 mm) or 15. For a garage installation, the gas pipe height must be an additional 18" (460 mm) from the floor. NOTE: For LP gas connections, you must use pipe-joint compound resistant to action of LP gas Do not use TEFLON® tape. To avoid damaging floor, use a large flat piece of cardboard from dryer carton; place under entire back edge of dryer. Firmly grasp dryer body (not console panel) and gently lay dryer down on cardboard.  /8" pipe-to-flare adapter 3 fitting A combination of pipe fittings must be used to connect dryer to existing gas line. Your connection may be different, according to supply line type, size, and location. 10 Plan Vent System Choose your exhaust installation type Recommended exhaust installation: B A F G C D E Special provisions for mobile homes: Exhaust vent must be securely fastened to a noncombustible portion of mobile home and must not terminate beneath the mobile home. –■ When using elbows or making turns, allow as much room as possible. Determine vent length and elbows needed for best drying performance: ■■ Use the “Vent System Charts” on the next page to determine Optional exhaust installations: This dryer can be converted to exhaust out the right side, left side (all models except WGD71HEW), or through the bottom. If you prefer, you may contact your local dealer to have the dryer converted. NOTE: Do not use vent runs longer than those specified in “Vent System Charts. € Exhaust systems longer than those specified will: ■■ Shorten life of dryer. –■ Reduce performance, resulting in longer drying times and increased energy usage. Bottom exhaust installation C 11 The “Vent System Charts” provide venting requirements that will help achieve best drying performance. (305 mm) Install exhaust hood and use caulking compound to seal exterior wall opening around exhaust hood. Connect vent to exhaust hood 0 1 2 3 4 * or Model WGD71HEW only; for all other models, refer to the F Standard Vent System Chart above. To find your model number, refer to the model and serial number plate in the inner door well. [. . . ] Insert the tabs on the hinge into the mounting slot and slide down to engage the top tab. Remove inner door from outer door IMPORTANT: If the protective film has not yet been removed from the dryer, peel the film from the dryer door before proceeding. Using a TORX® T25® screwdriver, remove the 4 screws securing the door hinge to the dryer and lift up and out to remove the door. Using a Phillips screwdriver, remove the 10 screws securing the inner door to the outer door. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WGD70HEBW




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WGD70HEBW will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.