User manual WHIRLPOOL WA STAR 70 EX BK INSTALLATION

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WA STAR 70 EX BK. We hope that this WHIRLPOOL WA STAR 70 EX BK user guide will be useful to you.


WHIRLPOOL WA STAR 70 EX BK INSTALLATION: Download the complete user guide (1545 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WA STAR 70 EX BK KURZANLEITUNG (261 ko)
   WHIRLPOOL WA STAR 70 EX BK PRODUKTDATENBLATT (56 ko)
   WHIRLPOOL WA STAR 70 EX BK PRODUKTDATENBLATT (56 ko)
   WHIRLPOOL WA STAR 70 EX BK BEDIENUNGSANLEITUNG (186 ko)
   WHIRLPOOL WA STAR 70 EX BK BEDIENUNGSANLEITUNG (186 ko)
   WHIRLPOOL WA STAR 70 EX BK PRODUCT FICHE (53 ko)
   WHIRLPOOL WA STAR 70 EX BK PRODUCT FICHE (53 ko)
   WHIRLPOOL WA STAR 70 EX BK PROGRAM CHART (255 ko)
   WHIRLPOOL WA STAR 70 EX BK INSTRUCTION FOR USE (190 ko)

Manual abstract: user guide WHIRLPOOL WA STAR 70 EX BKINSTALLATION

Detailed instructions for use are in the User's Guide.

[. . . ] €¢ Read this “INSTALLATION GUIDE” before operating. €¢ Keep this “INSTALLATION GUIDE” for future reference. €¢ Read the general recommendations about disposing of packaging in the Instructions for Use. [. . . ] If the appliance is to be installed on a wooden or floating floor, distribute the weight by placing it on a sheet of plywood measuring at least 60 x 60 cm and thickness of at least 3 cm which is secured to the floor. If the floor is uneven, adjust the 4 levelling feet as required; do not insert pieces of wood etc. Slacken the locknut clockwise (see arrow) using the wrench C supplied. Lift slightly the machine and adjust the height of the foot revolving it. Important: Tighten the locknut by turning it anti-clockwise towards the appliance casing. If the water inlet hose is not already installed, it must be screwed to the appliance. €¢ The appliance must not be connected to the mixing tap of an un-pressurized water heater. €¢ Check water-tightness of connections by turning the tap completely on. €¢ Check the inlet hose regularly for brittleness and cracks and replace if necessary. €¢ The washing machine can be connected without a non-return valve. Depending on the model, the inlet hose and the plastic enclosure at the tap connection contain electrical components. Do not cut the hose and do not immerse the plastic enclosure in water. Isolate the appliance from the mains immediately if the hose is damaged. In case the drain hose is installed as shown on the models below: Unclip it from the holders marked with arrows. In case the drain hose is installed in the upper part of the washing machine: Unclip it from both holders marked by the arrows (see below, depending on the model). If your washing machine is a built-in model: Connect the drain hose to the siphon. [. . . ] Overall drain hose length: 2, 50 m (in this case, the maximum height for fixation see picture below - is 90 cm). The electrical power cable must be replaced exclusively by a licensed electrician. Electrical connections must be made in accordance with local regulations. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WA STAR 70 EX BK




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WA STAR 70 EX BK will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.