User manual WHIRLPOOL UXT4236ADS INSTALLATION GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL UXT4236ADS. We hope that this WHIRLPOOL UXT4236ADS user guide will be useful to you.


WHIRLPOOL UXT4236ADS INSTALLATION GUIDE: Download the complete user guide (2869 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL UXT4236ADS WARRANTY INFORMATION (94 ko)
   WHIRLPOOL UXT4236ADS DIMENSION GUIDE (202 ko)
   WHIRLPOOL UXT4236ADS WARRANTY INFORMATION (94 ko)

Manual abstract: user guide WHIRLPOOL UXT4236ADSINSTALLATION GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] 4 CM) RANGE HOOD Installation Instructions and Use & Care Guide For questions about features, operation/performance, parts, accessories or service, call: 1-800-253-1301 or visit our website at www. RANGE HOOD SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. This symbol alerts you to potential hazards that can kill or hurt you and others. [. . . ] Prepare Range Hood Align the exterior edge of the mounting brackets with the exterior edges of the upper cabinet. –  ■ Set the range hood on its back on a covered surface. Using a #2 Phillips screwdriver, remove the rectangular damper attached with 3. Using a flat-blade screwdriver, remove the appropriate power supply knockout. 4 cm) Rectangular Vent System Lift the range hood into place and insert the mounting bracket tabs through the slots in the back of the range hood. –  45˚+ 90˚ A A Using a ¹⁄₂" (13 mm) drill bit, drill a hole in each of the dots marked previously on either the wall or upper cabinet. 8 cm) round vent mounting plate, draw the vent opening outline on the underside of the cabinet: Place the vent mounting plate on the bottom of the cabinet. Position the edge of the plate with the widest distance (A) between the hole and edge of the mounting plate against the wall. Position the side edges of the mounting plate between the dots marked previously. IMPORTANT: The widest edge (A) of the vent mounting plate must be positioned against the wall. D D Hold the range hood firmly in place with one hand and bend each mounting tab (A) upward approximately 90°. For a top vented installation: Mark the 4 vent hole locations (C) on the top of the range hood. For direct wire installations, run the home power supply cable according to the National Electric Code or CSA standards and local codes and ordinances. There must be enough wiring from the fused disconnect (or circuit breaker) box to make the connection in the range hood electrical terminal box. OPTIONAL: If you prefer, bend the rear tabs against the rear of the range hood and attach to the wall using #8-18 x ⁵⁄₈" (4. –  ■ ■ Connect the green (or bare) ground wire (C) from the power supply to the green ground screw in the electrical box and tighten the screw securely. Option 2 - Power Cord Kit Installations For optional power cord kit installations, follow the instructions supplied with the power cord kit. See the “Assistance or Service” section for information on ordering. NOTE: Use only with range hood cord connection kits that have been investigated and found acceptable for use with this model range hood. Complete the Installation ■ Connect the ventwork to the range hood. Seal joints with vent clamps or duct tape to make secure and airtight. –  Install a 120V, 75W maximum, incandescent light bulb with E26 base. [. . . ] Please take a few minutes to review the Troubleshooting or Problem Solver section of the Use and Care Guide, scan the QR code on the right to access additional resources, or visit www. If outside the 50 United States or Canada, contact your authorized Whirlpool dealer to determine whether another warranty applies. ONE YEAR LIMITED WARRANTY WHAT IS COVERED For one year from the date of purchase, when this major appliance is installed, operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Specified Replacement Parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased, or at its sole discretion replace the product. In the event of product replacement, your appliance will be warranted for the remaining term of the original unit's warranty period. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL UXT4236ADS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL UXT4236ADS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.