User manual WHIRLPOOL UXT2030ADB USE & CARE GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL UXT2030ADB. We hope that this WHIRLPOOL UXT2030ADB user guide will be useful to you.


WHIRLPOOL UXT2030ADB USE & CARE GUIDE: Download the complete user guide (2300 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL UXT2030ADB INSTALLATION GUIDE (2311 ko)
   WHIRLPOOL UXT2030ADB WARRANTY INFORMATION (92 ko)
   WHIRLPOOL UXT2030ADB DIMENSION GUIDE (232 ko)
   WHIRLPOOL UXT2030ADB INSTALLATION GUIDE (2311 ko)
   WHIRLPOOL UXT2030ADB WARRANTY INFORMATION (92 ko)

Manual abstract: user guide WHIRLPOOL UXT2030ADBUSE & CARE GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] 2 CM) RANGE HOOD Installation Instructions and Use & Care Guide For questions about features, operation/performance, parts, accessories or service, call: 1-800-253-1301 or visit our website at www. RANGE HOOD SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. This symbol alerts you to potential hazards that can kill or hurt you and others. [. . . ] 2 x 25 mm) flat-head #2 Phillips screws, install the mounting brackets using the upper holes. – NOTE: For installations to a surface other than drywall, it is recommended that a qualified contractor determine the anchoring method. Prepare Range Hood Align the exterior edge of the mounting brackets with the exterior edges of the upper cabinet. Using a flat-blade screwdriver, remove the appropriate power supply knockout. 8 cm) round vent mounting plate, draw the vent opening outline on the underside of the cabinet: Place the vent mounting plate on the bottom of the cabinet. Position the edge of the plate with the widest distance (A) between the hole and edge of the mounting plate against the wall. Position the side edges of the mounting plate between the dots marked previously. IMPORTANT: The widest edge (A) of the vent mounting plate must be positioned against the wall. Lift the range hood into place and insert the mounting bracket tabs through the slots in the back of the range hood. Drill Electrical Opening C C B Hold the range hood firmly in place with one hand and bend each mounting tab (A) upward approximately 90°. Using a 1¹⁄₄" (3 cm) drill bit, drill the hole in the dot marked previously at the electrical strain relief. OPTIONAL: Using a ¹⁄₈" (3 mm) drill bit, drill pilot holes for the dots marked previously at each mounting tab at an approximate 45° angle in an upward direction. 2 x 16 mm) truss-head screw into the mounting tab (D) on each side of the range hood as shown in the inset. If the range hood does not operate, check to see whether a circuit breaker has tripped or a household fuse has blown. – C ■ NOTE: To get the most efficient use from your new range hood, read the “Range Hood Use” section. Option 1 - Direct Wire Installations ■ Use a UL Listed/CSA Approved wire connector and connect the 2 white wires (A) together. Use a UL Listed/CSA Approved wire connector and connect the 2 black wires (B) together. – Connect the green (or bare) ground wire (C) from the power supply to the green ground screw in the electrical box and tighten the screw securely. 9 RANGE HOOD USE The range hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, start the hood before cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen. On/Off light switch Operating the light B C Press the light switch to the left to turn the light On. RANGE HOOD CARE Cleaning IMPORTANT: Clean the hood and grease filters frequently according to the following instructions. [. . . ] Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be repaired in the home and only in-home service is covered by this warranty. Repairs to parts or systems resulting from unauthorized modifications made to the appliance. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an authorized Whirlpool servicer is not available. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL UXT2030ADB




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL UXT2030ADB will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.