User manual WHIRLPOOL SEA LINE 1200 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL SEA LINE 1200. We hope that this WHIRLPOOL SEA LINE 1200 user guide will be useful to you.


WHIRLPOOL SEA LINE 1200 INSTRUCTION FOR USE: Download the complete user guide (305 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL SEA LINE 1200 KURZANLEITUNG (373 ko)
   WHIRLPOOL SEA LINE 1200 TABLEAU DE PROGRAMMES (374 ko)
   WHIRLPOOL SEA LINE 1200 PRODUCT-INFORMATIEBLAD (373 ko)
   WHIRLPOOL SEA LINE 1200 PROGRAM CHART (370 ko)
   WHIRLPOOL SEA LINE 1200 KURZANLEITUNG (373 ko)

Manual abstract: user guide WHIRLPOOL SEA LINE 1200INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] Close the door with light force, it will lock home audibly. 21 CHILD SAFETY (IF AVAILABLE) To secure the appliance against improper use turn the plastic screw on the interior of the door. To do this, use the thick rounded corner of the coloured insert from the detergent dispenser or a coin: • Slot vertical: the door will not lock • Slot horizontal: the door can be locked again BEFORE THE FIRST WASH CYCLE To remove any residual water used in testing by the manufacturer, we recommend that you carry out a short wash cycle without laundry. Pour a little detergent (about 30 ml) into the detergent compartment 4. Select and start a short programme (see quick reference guide). PREPARING THE WASH 1. Sort the laundry according to. . . • Type of fabric / care label symbol Cottons, mixed fibres, easy care/synthetics, wool, handwashed items • Colour Separate coloured and white items. [. . . ] Check that the foreign body trap is seated properly and tightly in place. Select a programme and start it. 25 DRAINING RESIDUAL WATER Before emptying the residual water, switch the appliance off and unplug it from the mains socket. Open the filter cover with the help of the coloured insert from the detergent container. Turn on the tap and ensure that the connections are completely water-tight. Clean the internal mesh filter and screw the water inlet hose back onto the tap. Turn on the tap and ensure that the connection is completely water-tight. 27 TROUBLESHOOTING GUIDE Depending on the model, your washing machine is equipped with various automatic safety functions. This enables faults to be detected in good time and the safety system can react appropriately. These faults are frequently so minor that they can be solved within a few minutes. Press “Start/ Pause” button; • the “Rinse Hold” button is pushed, terminate this option by pressing the button again; • “On/Off” lamp is off. Press “On/Off” button; • the washing machine safety system has been activated (see fault description table). The appliance will not start, no lamp lights up. Check whether: Detergent and additive product residues in dispenser at end of wash. Check whether: • the siphon is correctly installed and clean (see “Care and Maintenance”); • enough water is being supplied. The mesh filters between the inlet hose and the tap could be blocked (see “Care and Maintenance”). Check and clean the filter two or three times a year (see “Removing the filter”). • the mains plug is inserted into the socket; • the wall socket is functioning correctly (use a table lamp or similar); • a programme is selected correctly; • the “On/Off” button (depending on model) has been pressed. The appliance will not start, but. . . (varies depending on model) . . . the “Start/Pause” lamp is flashing. Check whether: The appliance vibrates during the spin cycle. Check whether: • the appliance is levelled and solidly installed on all four feet (see “Installation Guide”); • the transit bolts have been removed. The transit bolts must be removed before the appliance can be used (see “Installation Guide”). • the appliance door is properly closed (child safety); • the programme has been changed; • the water tap is open. If not, open the tap and press the “Start/Pause” button. . . . the “On/Off” lamp is on. Check whether: Final spin results are poor: The appliance has an imbalance detection and correction system. If individual heavy articles are loaded (bathmat, bathrobe, etc. ) this system may reduce the spin speed automatically to protect the appliance or even interrupt the spin cycle altogether, if the imbalance is too high even after several spin starts. • If the laundry is still too wet at the end of the cycle, add smaller articles of laundry to balance the load and repeat the spin cycle. Ensure correct amount of detergent is used • the appliance door is properly closed (child safety); • a programme has been selected and the programme is started; • the water tap is open. If not, open the tap and switch the appliance first off, then on. The appliance stops during the programme (varies depending on model). Check whether: • the “Rinse Hold” lamp is on, terminate this option by pressing the button again; • another programme has been selected. Reselect the desired programme and press the “Start/Pause” button; No water or insufficient water supply: • the appliance has a safety hose and the safety valve has opened (red indicator in the safety valve inspector window). In this case replace it with a new safety hose. What should I do when the automatic safety system detects a malfunction?(varies depending on model) The programme is interrupted and various indicators (if available) point to the source of the fault. [. . . ] 3. If the washing machine continues to function incorrectly, call After-Sales Service. • The service code (number after the word SERVICE). The After-Sales Service sticker is on the inside of the door. After-Sales Service numbers and addresses can be found in the guarantee booklet or contact the dealer. TRANSPORT/HANDLING Never lift the appliance by the worktop when transporting. 1. Drain residual water from the appliance and hoses (see “Removing The Filter”/”Draining Residual Water”). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL SEA LINE 1200




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL SEA LINE 1200 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.