User manual WHIRLPOOL GSF 4630 WS PROGRAM CHART

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL GSF 4630 WS. We hope that this WHIRLPOOL GSF 4630 WS user guide will be useful to you.


WHIRLPOOL GSF 4630 WS PROGRAM CHART: Download the complete user guide (191 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL GSF 4630 WS MODE D'EMPLOI (219 ko)
   WHIRLPOOL GSF 4630 WS KURZANLEITUNG (198 ko)
   WHIRLPOOL GSF 4630 WS CUADRO DE MANDOS (192 ko)
   WHIRLPOOL GSF 4630 WS SCHEDA PROGRAMMI (192 ko)
   WHIRLPOOL GSF 4630 WS GEBRUIKSAANWIJZING (212 ko)
   WHIRLPOOL GSF 4630 WS BEDIENUNGSANLEITUNG (214 ko)
   WHIRLPOOL GSF 4630 WS INSTRUZIONI PER L'USO (172 ko)
   WHIRLPOOL GSF 4630 WS LIBRO DE INSTRUCCIONES (219 ko)
   WHIRLPOOL GSF 4630 WS PRODUCT-INFORMATIEBLAD (192 ko)
   WHIRLPOOL GSF 4630 WS INSTRUCTION FOR USE (247 ko)

Manual abstract: user guide WHIRLPOOL GSF 4630 WSPROGRAM CHART

Detailed instructions for use are in the User's Guide.

[. . . ] Values may vary in relation to usage, e. g. : different loads, water temperatures - above or below 15°C - as well as water hardness and power supply voltage, etc. Important information for Test Laboratories: For detailed information on the EN comparison test and other tests, contact the following address: “nk_customer@email. whirlpool. com”. (We reserve the right to make technical modifications) 5019 496 90267 How to use the appliance Further indications are given in the single chapters and in the user instructions. Switch on the appliance Press the ON / OFF button. Large compartment A: How to fill the detergent dispenser With each wash cycle. Small compartment B: For programmes with pre-wash only. A B C Check the rinse aid level Mechanical indicator lamp C. Electric indicator on control panel (if provided). Check the regeneration salt level On models with water softener system only. [. . . ] Electric indicator on control panel (if provided). Load the racks Close the door, turn on the water tap Select a programme Select additional options Refer to the dishwasher loading instructions. The last programme selected will light up. If necessary (and if provided) the corresponding indicator lamp lights up. The selected programme is then memorised (even in the event of power failure). until the Start indicator lamp switches off; Select another programme and press the START button again. Press the START button - Only open the dishwasher if necessary (Warning: beware of hot steam). - If the appliance is switched off during a wash cycle, when switched on again it will resume the cycle from where it was interrupted. Only after the START button has switched off: Press the ON / OFF button. Unload the appliance, starting from the lower rack. Switch off the appliance Shut off the water tap, unload the racks Wash cycle Dishwasher loading instructions and racks provided Upper rack: Multi-purpose support (A) : Depending on the position, for long-handles utensils, cups and glasses. • The programme can be set to “0” to start. If crockery is not perfectly dry If crockery is not perfectly clean • Insufficient rinse aid. • Incorrect detergent/detergent too old. • Increase dosage *. • Depending on the material, if necessary use a detergent with a greater whitening power. Sandy or grainy residues Colour of plastic parts faded Deposits on crockery • removable • Clogged filters. • Tomato/carrot juice. . . • Streaks on the crockery/glasses. • Layer of salt on crockery/glasses. • Increase the rinse aid dosage *. • Use suitable glasses. • not removable • Insufficient water softening, calcium deposits. • Cannot be washed in the Opaque glasses/ dishwasher. glasses not sparkling Rust on cutlery Identifying appliance faults • Not made of stainless steel. • Use suitable cutlery. • The START indicator lamp flashes. [. . . ] glasses not sparkling Rust on cutlery Identifying appliance faults • Not made of stainless steel. • Use suitable cutlery. • The START indicator lamp flashes. • Ensure that the filter assembly is not clogged and if necessary clean it *. Press the START button for about 2 seconds, until the START indicator lamp switches off. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL GSF 4630 WS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL GSF 4630 WS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.