User manual WHIRLPOOL AWP 500 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AWP 500. We hope that this WHIRLPOOL AWP 500 user guide will be useful to you.


WHIRLPOOL AWP 500 INSTRUCTION FOR USE: Download the complete user guide (297 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AWP 500 PROGRAM CHART (230 ko)

Manual abstract: user guide WHIRLPOOL AWP 500INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] 5gb10030. fm5 Page 62 Thursday, July 18, 2002 9:58 AM CONTENTS BEFORE USING THE WASHING MACHINE FIRST WASH CYCLE PRECAUTIONS AND GENERAL RECOMMENDATIONS DESCRIPTION OF THE WASHING MACHINE PREPARATION OF THE WASHING DETERGENTS AND ADDITIVES LIQUID BLEACH (HYPOCHLORITE) DYEING WASHING PROGRAMME REMOVING THE FILTER DRAINING RESIDUAL WATER CARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER-SALES SERVICE TRANSPORT AND HANDLING INSTALLATION ELECTRICAL CONNECTION Black Process Plate 5gb10030. fm5 Page 63 Thursday, July 18, 2002 9:58 AM BEFORE USING THE WASHING MACHINE 1. Removing the packaging and check • After unpacking, make sure that the washing machine is undamaged. • Keep the packaging materials (plastic bags, polystyrene parts, etc. ) out of reach of children, as they are potentially dangerous. 6. Electrical connections • Electrical connections must be carried out by a qualified technician in compliance with the manufacturer’s instructions and current standard safety regulations. • Voltage information, power consumption and electrical protection data are supplied on the inside of the appliance door. • The appliance must be connected to the mains exclusively by means of a socket with an earth connection in accordance with established regulations. [. . . ] Load the machine, close the door, select “Rinse and Spin” and start. Once the machine has started filling, pour the dissolved starch into detergent dispenser chamber . Flush the chamber straight away by adding about half a litre of water LIQUID BLEACH (HYPOCHLORITE) There are two possible ways to use liquid bleach (hypochlorite). IMPORTANT: In a machine without a specific bleach dispenser chamber , only the pre-bleach method can be used (see point 2). Traditional way: • Add bleach into the bleach dispenser chamber . • The machine will automatically deliver both products to the laundry at the appropriate time, the detergent is added in the main wash, the bleach is added during the second cold rinse. 67 Black Process Plate 5gb10030. fm5 Page 68 Thursday, July 18, 2002 9:58 AM 2. The indicator light will come on (if it is present - depending on the model). Door lock The door locks automatically after the programme start until the end of the programme. If the programme selector is moved to the “Stop” position or if the electricity supply is interrupted, then after approximately one minute the door is released. In case of interrupted electricity do not open the door, because hot water could be released from the appliance. Programme end The programme selector knob is at the stop position. Do not fully close the door but leave it ajar to allow the drum to dry out. Changing programme 1. For this programme do not add any further detergent. Changing options The options can be selected or deselected without switching off the appliance. Programme interruption or pause To interrupt the running programme for a certain period and continue it at a later time: 1. Following the desired pause press the “On/Off” button once again. Cancelling the programme If the current programme is to be terminated prematurely and cancelled, the water must be pumped out first before the door can be opened: 1. Press the “On/Off” button in order to start the “Drain” programme. 69 Black Process Plate 5gb10030. fm5 Page 70 Thursday, July 18, 2002 9:58 AM REMOVING THE FILTER 1. Switch off the appliance and drain the water (see next paragraph “Draining residual water”). Slowly turn the filter anticlockwise without unscrewing it completely (using pliers to handle the filter grip makes screwing easier). Pour 1/2 litre of water into the detergent drawer and check that water does not leak from the filter. • Check the filter if the appliance is not draining properly or if it fails to perform spin cycles. • Remove the filter if the pump is blocked by an object (buttons, coins, safety pins, etc. ). IMPORTANT: Make sure the water has had time to cool before draining the appliance. 2 6 4 DRAINING RESIDUAL WATER 1. Unclip the drain hose connection on the rear part of the machine (see arrow A and B). Note: After a correct draining cycle the residual water amounts about up to 1 litre but there can be up to 20 litres of water in the machine if stopped during a programme and even 40 litres if the pump is blocked. [. . . ] Secure the plywood sheet to the floor. 75 Black Process Plate 5gb10030. fm5 Page 76 Thursday, July 18, 2002 9:58 AM Connect the water inlet hose For models with straight hose “A” 1. Insert the dirt strainer (already premounted on the hose end or included in the accessories) into the threaded tap coupling. Check water-tightness of tap and appliance connections by turning the tap completely on. If the hose is too short, replace it with a suitable length of pressure resistant hose (1000 kPa min, EN 50084 approved type). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AWP 500




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AWP 500 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.