User manual WHIRLPOOL AWM 8125/1 INSTRUCTION FOR USE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AWM 8125/1. We hope that this WHIRLPOOL AWM 8125/1 user guide will be useful to you.
You may also download the following manuals related to this product:
WHIRLPOOL AWM 8125/1 PROGRAMKORT (391 ko)
WHIRLPOOL AWM 8125/1 MODE D'EMPLOI (614 ko)
WHIRLPOOL AWM 8125/1 TABLEAU DE PROGRAMMES (285 ko)
WHIRLPOOL AWM 8125/1 PROGRAMKORT (391 ko)
WHIRLPOOL AWM 8125/1 PROGRAM CHART (111 ko)
Manual abstract: user guide WHIRLPOOL AWM 8125/1INSTRUCTION FOR USE
Detailed instructions for use are in the User's Guide.
[. . . ] Adjustable feet
1
3
2
4 5
6
7 8 9
DOOR
To open the single glass door hold the door handle, press the inside handle and pull the door up. Close the door with light force, it will lock home audibly.
20
Black process 45. 0° 100. 0 LPI
3gb05398. fm Page 21 Monday, August 26, 2002 12:42 PM
CHILD SAFETY (IF AVAILABLE)
To secure the appliance against improper use turn the plastic screw on the interior of the door. To do this, use the thick rounded corner of the coloured insert from the detergent dispenser or a coin: Slot vertical: the door will not lock Slot horizontal: the door can be locked again
BEFORE THE FIRST WASH CYCLE
To remove any residual water used in testing by the manufacturer, we recommend that you carry out a short wash cycle without laundry. Pour a little detergent (about 30 ml) into the detergent compartment . [. . . ] For model A only remove also the siphon from the chlorine bleach compartment. Insert the detergent dispenser in the washing machine.
A A
B1
B2
Mesh Filter in the Water Connection
Check and clean regularly. Clean the internal mesh filter and screw the water inlet hose back onto the tap. Pull off the mesh filter from the washing machine connection with universal pliers and clean it. Turn on the tap and ensure that the connections are completely water-tight. Clean the internal mesh filter and screw the water inlet hose back onto the tap. Turn on the tap and ensure that the connection is completely water-tight. 26
Black process 45. 0° 100. 0 LPI
3gb05398. fm Page 27 Monday, August 26, 2002 12:42 PM
TROUBLESHOOTING GUIDE
Depending on the model, your washing machine is equipped with various automatic safety functions. This enables faults to be detected in good time and the safety system can react appropriately. These faults are frequently so minor that they can be solved within a few minutes. Press Start/ Pause button; the Rinse Hold button is pushed, terminate this option by pressing the button again; On/Off lamp is off. Press On/Off button; the washing machine safety system has been activated (see fault description table).
The appliance will not start, no lamp lights up.
Check whether: the mains plug is inserted into the socket; the wall socket is functioning correctly (use a table lamp or similar); a programme is selected correctly; the On/Off button (depending on model) has been pressed.
Detergent and additive product residues in dispenser at end of wash.
The appliance will not start, but. . . (varies depending on model) . . . the Start/Pause lamp is flashing.
Check whether: the appliance door is properly closed (child safety); the programme has been changed; the water tap is open. If not, open the tap and press the Start/Pause button.
Check whether: the siphon is correctly installed and clean (see Care and Maintenance); enough water is being supplied. The mesh filters between the inlet hose and the tap could be blocked (see Care and Maintenance). Check and clean the filter two or three times a year (see Removing the filter).
The appliance vibrates during the spin cycle.
. . . the On/Off lamp is on.
Check whether: the appliance is levelled and solidly installed on all four feet (see Installation Guide); the transit bolts have been removed. The transit bolts must be removed before the appliance can be used (see Installation Guide).
Check whether: the appliance door is properly closed (child safety); a programme has been selected and the programme is started; the water tap is open. If not, open the tap and switch the appliance first off, then on.
Final spin results are poor:
The appliance stops during the programme (varies depending on model).
Check whether: the Rinse Hold lamp is on, terminate this option by pressing the button again; another programme has been selected. Reselect the desired programme and press the Start/Pause button;
The appliance has an imbalance detection and correction system. If individual heavy articles are loaded (bathmat, bathrobe, etc. ) this system may reduce the spin speed automatically to protect the appliance or even interrupt the spin cycle altogether, if the imbalance is too high even after several spin starts. If the laundry is still too wet at the end of the cycle, add smaller articles of laundry to balance the load and repeat the spin cycle. Ensure correct amount of detergent is used
No water or insufficient water supply:
the appliance has a safety hose and the safety valve has opened (red indicator in the safety valve inspector window). In this case replace it with a new safety hose.
What should I do when the automatic safety system detects a malfunction? [. . . ] 3. If the washing machine continues to function incorrectly, call After-Sales Service. The washing machine model The service code (number after the word SERVICE).
The After-Sales Service sticker is on the inside of the door. After-Sales Service numbers and addresses can be found in the guarantee booklet or contact the dealer
TRANSPORT/HANDLING
Never lift the appliance by the worktop when transporting.
1. Drain residual water from the appliance and hoses (see Removing The Filter/Draining Residual Water). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AWM 8125/1
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AWM 8125/1 will begin.