User manual WHIRLPOOL AWM 6122 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AWM 6122. We hope that this WHIRLPOOL AWM 6122 user guide will be useful to you.


WHIRLPOOL AWM 6122 INSTRUCTION FOR USE: Download the complete user guide (4029 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AWM 6122 PROGRAMKORT (193 ko)
   WHIRLPOOL AWM 6122 KURZANLEITUNG (159 ko)
   WHIRLPOOL AWM 6122 MODE D'EMPLOI (446 ko)
   WHIRLPOOL AWM 6122 BRUGSVEJLEDNING (3934 ko)
   WHIRLPOOL AWM 6122 BRUGSVEJLEDNING (3934 ko)
   WHIRLPOOL AWM 6122 GEBRUIKSAANWIJZING (460 ko)
   WHIRLPOOL AWM 6122 BEDIENUNGSANLEITUNG (456 ko)
   WHIRLPOOL AWM 6122 PRODUCT-INFORMATIEBLAD (156 ko)
   WHIRLPOOL AWM 6122 PROGRAMKORT (193 ko)
   WHIRLPOOL AWM 6122 PROGRAM CHART (192 ko)

Manual abstract: user guide WHIRLPOOL AWM 6122INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] CONTENTS BEFORE USING THE WASHING MACHINE FIRST WASH CYCLE PRECAUTIONS AND GENERAL RECOMMENDATIONS DESCRIPTION OF THE WASHING MACHINE CHILD SAFETY PREPARATION OF THE WASHING DETERGENTS AND ADDITIVES WASHING PROGRAMME REMOVING THE FILTER DRAINING RESIDUAL WATER CARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER-SALES SERVICE TRANSPORT AND HANDLING INSTALLATION BEFORE USING THE WASHING MACHINE 1. Removing the packaging and check • After unpacking, make sure that the washing machine is undamaged. • Keep the packaging materials (plastic bags, polystyrene parts, etc. ) out of reach of children, as they are potentially dangerous. 2. Remove the transit bolts • The appliance is fitted with transit bolts to prevent internal damage during transport. Before using the washing machine you must remove the transit bolts (see “Installation/ Remove the transit bolts”). [. . . ] Once the display has counted down the selected programme is started and the related programme remaining time is displayed. Cancel the start delay Turn the programme selector and set it to the desired programme. The remaining time of the selected programme is displayed and the “Start/Pause” button flashes. With liquid detergent, a dosing aid placed directly in the drum should be used if a start delay N. B. has been selected. Door lock The door locks automatically after the programme start until the end of the programme. The “Door Free” indicator is on, before the starting and at the end of the programme. If the programme selector is moved to the “ ” position or if the electricity supply is interrupted, then after approximately one minute the door is released. In this case do not open the door, because hot water could be released from the appliance. 78 Programme end The programme end is indicated by: • the “Door Free” indicator coming on and the remaining time indicator (if available) showing “0:00”. Do not fully close the door but leave it ajar to allow the drum to dry out. Changing programme and options 1. Press the “Start/Pause” button. The new programme resumes the wash programme at the same stage at which the preceding one was interrupted. For this programme do not add any further detergent. Programme interruption or pause To interrupt the running programme for a certain period and continue it at a later time: 1. Press the “Start/Pause” button. 2. Following the desired pause press the “Start/Pause” button once again. Cancelling the programme If the current programme is to be terminated prematurely and cancelled, the water must be pumped out first before the door can be opened: 1. Set the programme selector to programme setting “Drain”. The indicator (if available) above the “Start/Pause” button flashes. The spin indicator shows “0” and the remaining time indicator shows “0:02” minutes. 2. Press the “Start/Pause” button in order to start the “Drain” programme. 79 REMOVING THE FILTER 1. Remove the coloured insert from the detergent dispenser and use it to open the filter cover. Turn the filter slowly anti-clockwise until the grip is vertical; do not extract filter as yet. Insert the filter and screw it fully down in a clockwise direction (until the grip is horizontal). 11. Pour 0. 5 l of water into the detergent dispenser to reactivate the “Eco System”. • Check the filter if the appliance is not draining properly or if it fails to perform spin cycles. • Remove the filter if the pump is blocked by an object (buttons, coins, safety pins, etc. ). IMPORTANT: Make sure the water has had time to cool before draining the appliance. DRAINING RESIDUAL WATER • Drain the residual water as described in the “Removing the Filter” chapter (points 1 to 8). [. . . ] for models with Water Stop hose “B” If the flexible hose is damaged, unplug the appliance from the mains immediately. 2. Check water-tightness of tap and appliance connections by turning the tap completely on. If the hose is too short, replace it with a 3 m Water Stop hose (available from After-Sales Service or from your dealer). This operation must be carried out exclusively by a licensed electrician. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AWM 6122




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AWM 6122 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.