User manual VIVITAR VIVICAM 3826

[. . . ] V3826 User Manual English 040507TP FCC STATEMENT This device complies with Part 15 of the FCC Rules. This device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] In Capture mode, the zoom control is always active to zoom the lens between wide-angle and telephoto shots. Digital zoom cannot be used in [ ] Movie mode. 30 Self-Timer By using the self-timer you can join into the scene when capturing group shots. You can capture images with the self-timer in any shooting mode (Manual, Automatic, Macro, Portrait, Landscape, Night Scene or Sports). After the self-timer is set, the shutter automatically releases after 10 seconds. The self-timer lamp starts blinking relatively slow for 7 seconds and then blinking rapidly for the last 3 seconds. Set the mode dial base on the desired scenery (Manual, Automatic, Macro, Portrait, Landscape, Night Scene or Sports). To cancel the self-timer at any time, press the self-timer button to disrupt the sequence. E In Capture mode, pressing the button will set self-timer ON. After a self-timed shot is captured, the self-timer mode is turned OFF. In self-timer mode, rotating the mode dial will change into Capture mode. In self-timer mode, pressing [ ] or[ ] will change into Capture mode. 31 Flash The flash is designed to function automatically when lighting conditions warrant the use of flash. You can capture an image using a flash mode suitable to your circumstances. If you change the flash mode, the camera will retain that setting even if the camera is turned off. Set the mode dial base on the desired scenery (Manual, Automatic, Macro, Portrait, Landscape, Night Scene or Sports). Press repeatedly the button located on the rear side of the camera until your desired flash mode appears on the LCD monitor. The ViviCam 3826 has four flash modes: Automatic Flash (default), Automatic with Red-Eye Reduction, Fill Flash (on), and Flash Off. The modes appear cyclically when you press the button on the rear side of the camera. E 32 The table below will help to choose the appropriate flash mode: Flash Modes ] Automatic Flash ] Automatic with Red-Eye Reduction [ [ [ ] Fill Flash (on) [ ] Flash Off The flash fires automatically according to the ambient lighting conditions. This causes the pupil in the human eye to constrict, reducing the red-eye phenomenon. Select this mode when capturing images of people and animals in low-light conditions. Select this mode for recording images with high contrast (backlighting ) and deep shadows. Select this mode when capturing images in a place where flash photography is prohibited, or when the distance to the subject is beyond the effective range of the flash. E In [ In [ ] Macro mode, the flash is disabled. ] Night Scene mode, flash photography is set to Fill Flash (on). 33 Photography Modes Your ViviCam 3826 offers you choices of seven "scenes modes", which include Manual, Automatic, Macro, Portrait, Landscape, Night Scene and Sports modes. In these modes, your camera is optimized for the selected subject-type, sparing you the burden of making individual settings and adjustments, one-by-one. [. . . ] To access the Playback menu, press the button first and then press the through the menu options by using the / button. Scroll E Delete Refer to "Deleting Images/Video Clips" in Playback Mode. Copy to card This feature allows you to copy your images from the ViviCam 3826's memory card or an internal memory. However, you can only do this when the memory card is installed and the internal memory contains images. Then select [No] or [Yes] by using the / button and press OK button to confirm. [. . . ]