User manual VIVITAR VIVICAM 3315

[. . . ] Vivicam 3315 User Manual English. 1 digital camera user's manual Warranty Policy This camera is under warranty for one full year from the date of purchase by the original purchaser. In case of defects in materials or workmanship we will, at our discretion, will repair or replace the camera free of charge. This warranty does not include batteries, software, or other accessories which have not been manufactured by Vivitar. This warranty will not be honored if the camera has been mishandled, damaged, tampered with, or altered by anyone other than the manufacturer. [. . . ] Slide the battery cover in the direction indicated by the arrow on the battery cover door 2. Insert two AA batteries with the polarity as shown: (Note also the decal inside the battery compartment) 3. Close the battery cover Do not mix battery types (use only one battery type at a time) as this may cause poor camera performance, fire, or explosion Batteries must be placed in the battery compartment with correct polarity Batteries should be replaced when the battery indicator displays the "empty" icon To improve battery performance, replace both batteries at the same time Do not drop, puncture, or disassemble batteries and keep batteries away from heat Remove the batteries if they will not be used for an extended period of time IMPORTANT Please observe the following precautions as these may cause the battery to split or leak: Do not attempt to charge an alkaline battery Do not carry or store a battery with objects such as metal pens, necklaces, coins, or hairpins as this could short circuit the positive + and negative - terminals of a battery Do not subject batteries to strong mechanical shock or impact, such as hitting them with a hammer, stepping on them, or dropping them Using an AC Power Adapter (Optional accessory) 1. Connect one end of the power adapter to the port labelled "DC in 3V" as illustrated: 3. Plug the other end of the power adapter into a power outlet (A power supply must provide 3. 3 VDC rated at 2. 5 A for proper camera operation) (An AC adapter is an optional accessory and is not usually included with the camera) Use only the specified batteries or AC power adapter with this camera, the use of other power sources may cause a fire, or damage the camera 9 digital camera user's manual Using an SD Memory Card (Optional accessory) The V3315 camera is equipped with 8 MB of internal (built-in) memory. Press the Mode button to select the Still-Image Play Mode as indicated by arrows pointing at both Play 3. Use the arrow buttons and Record icons: to scroll forward/backward through the recorded images To Playback Images on a TV 1. Set the appropriate Video output (NTSC/PAL) corresponding to your TV standard 2. Connect one end of the video cable to the "VIDEO OUT" port of your camera 3. Connect the other end of the cable to a VIDEO IN port of your television or monitor 4. Use the arrow buttons to scroll forward/backward through the recorded images Video Playback 1. Press the Mode button to select the Movie Play Mode as indicated by arrows pointing at both the Play and Movie icons: 3. Use the arrow button to scroll forward/backward through the recorded videos 5. To pause/resume the playback, press shutter button once again Erasing Still Images There are two ways to erase (delete) images: * Erase One * Erase All ERASE MENU ERASE ONE ERASE ALL Note * Images recorded images on a memory card cannot be erased if it is write-protected * To erase images on an SD card, make sure to insert the card before deletion * To erase images recorded in the cameras internal memory, do not insert an SD card * External memory (SD card) always has priority over internal memory - whenever a memory card is inserted into the camera the camera will use the memory card for both capture and playback 12 ERASE CURRENT IMAGE 1. Press the Mode button to select the Still-Image Play Mode (see prior page) 2. Use the arrow buttons to highlight ERASE, press OK ERASE CURRENT? 5. "ERASE CURRENT?" will be displayed in the center of the image: 7. Press the OK to delete this image ERASE CURRENT ERASE IMAGE NUMBER 00003?Use the arrow buttons to highlight ERASE ALL, press OK to highlight YES, press OK ERASE ALL ARE YOU SURE?The "ERASE ALL" menu appears: * If there are no images stored in the memory "NO IMAGE" is displayed Erasing a Video To erase a video: 1. Press the Mode button to select the Movie Play Mode (see prior page) 2. Press OK - follow the screens prompts to delete the video * If no videos are present, "No Movie" will be displayed PLAY MENU SETUP ERASE VIDEO 13 digital camera user's manual Setting Resolution and Image Quality The V3315 provides six different image resolution and quality settings: 1280 x 1024 pixels resolution with Super Fine 640 x 480 pixels resolution with Super Fine To change the resolution & quality setting: 1. [. . . ] You may choose to turn on, or off, camera sound effects which occur each time a camera button is pressed. (Default=OFF) Use the arrow buttons: to select on/off, press OK Control returns to the SETUP MENU when the change is made. The sound preference setting is retained when the camera is powered off FORMAT MEDIA Formats the SD memory card and erases all data from the card. Use the arrow buttons: Use the arrow buttons: to select FORMAT MEDIA, press OK to select YES, press OK "Are You Sure?" will be displayed The memory card will be reformatted. [. . . ]