User manual VIEWSONIC VT2430

[. . . ] : VS12464-1G Contents Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Copyright Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Antenna Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · When the remote control will not to be used for an extended period, remove the batteries. ENGLISH 2. Connecting RF antenna or Cable TV Wire Make sure the power is OFF before installing your LCD TV. Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial cable. Preset the TV channels into memory with Auto Scan function when using an antenna or cable TV system without a cable connecter box (See page 15). RF Cable or Adapter ViewSonic 9 VT2430 3. Connecting to DVD / Set Top Box 1) With AV cable: Connect Video / Audio cables from compatible devices into the back panel of your LCD TV. RCA A/V Cable (not supplied) VCD or DVD Player 2) With S-Video cable: ENGLISH S-Video Cable (not supplied) Audio in Cable (not supplied) VCD or DVD Player 3) With YPbPr cable: YPbPr Cable (not supplied) Audio in Cable (not supplied) VCD or DVD Player ViewSonic 10 VT2430 4) With HDMI cable: (DVD Player should have the HDMI output terminal) VCD or DVD Player HDMI Cable (not supplied) 4. Connecting to a computer ENGLISH 1) With VGA cable: Connect the VGA cable from VGA output of the computer to the VGA terminal input of your LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer to the audio input terminal (green) of the LCD TV. PC PC Audio In Cable (not supplied) VGA 15 Pin Cable ViewSonic 11 VT2430 2) With HDMI-DVI cable: Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input of the LCD TV. (Only image display is supported) PC HDMI-DVI Cable (not supplied) AC wall socket Power Cord ViewSonic 12 VT2430 ENGLISH 5. Connecting with the power cord Connect the power cord to the AC inlet at the back of your LCD TV, after all connections have been completed, and plug the other end of the power cord into a correctly grounded electrical outlet. Basic Operation To operate your LCD TV, you may use the TV remote control or buttons located at bottom of the LCD TV to select input source, change channels, or adjust volume. Power On/Off To turn the LCD TV on/off : Press the POWER button at the bottom of the LCD TV or press (POWER) button on your remote control to turn on/off the TV. Note: when there is no signal in the PC mode, the power LED indicator lights amber after a few seconds' idleness. Select input source Press the (INPUT) button on the remote control , then press or to select the required input source between TV, AV, S-Video, YPbPr, HDMI and PC. To confirm the input source, press (ENTER) button. ENGLISH Volume Adjusting Press +/- (VOL +/-) to adjust volume. If you want to restore volume, press (MUTE) again, or press +/- (VOL +/-) directly. Channel Select Press number keys, or / (CH ) buttons to select the desired channels. Sleep Time Setting Repeatedly press (SLEEP) button to set the off timer. The function is used to automatically shut off the LCD TV after a preset period of time passed. There are several times for choice -- 15min. , 30min. , 45min. , and 60min. . INFO To display the current information of the LCD TV, press (INFO), and the current state will be displayed on the screen. Switch Sound Mode Repeatedly press MPX button on remote control to Switch the sound mode in NICAM-Stereo or NICAM-Dual. (only available for Hong Kong area) Using OSD Menu You are able to use OSD menus to adjust various settings by using your remote control or menu buttons on the front panel of the LCD TV. The basic operation is as following: t Press (MENU) to display OSD menu. [. . . ] However, the component still comforms to the EU RoHS directive (2002/95/EC), and is exempted from it. ViewSonic 22 VT2430 Limited Warranty VIEWSONICTM LCD TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty is effective: ViewSonic LCD TV are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of the first customer purchase. [. . . ]