User manual VIEWSONIC PLED-W500

[. . . ] PLED-W500 LED Projector User Guide MPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at selection box in the upper right corner of our website. "Antes de operar su equipo lea cu idadosamente las instrucciones en este manual" Model No. VS14048 Compliance Information FCC Statement This device complies with part 15 of FCC Rules. [. . . ] If the image Clock Change the display data frequency to match the frequency of your computer's H. Position" ranges will depend on input source. 30 SETTING | Advanced Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. Off: No logo is displayed. Closed Caption Use this function to enable close caption and activate the closed caption menu. Select an appropriate closed captions option: Off, CC1, CC2, CC3, CC4. Security Refer to page 32. 31 SETTING | Advanced | Security Security Off: Choose "Off" to be able to switch on the projector without password Change Password First time: Press to set the password. The password has to be 6 digits. Use number buttons on the remote control to enter your new password and then press "Enter" Change Password: Press to input the old password. Use number buttons to enter the current password and then press "Enter" to Enter a new password (6 digits in length) using the number buttons on the remote control, then press "Enter" Enter the new password again and press "Enter" If the incorrect password is entered for 3 times, the projector will automatically shut down. 32 When you input the password, you must press the "Enter" button and other number button on the remote control at the same time. 33 OPTIONS Auto Source On: The projector will search for other signals if the current input signal is lost. Off: The projector will only search current input connection. Fan Mode AUTO: The built-in fans automatically run at a variable speed according to the internal temperature. Select this option when using the projector at altitudes approximately 2500 feet/760 meters or higher. Information Hide On: Choose "On" to hide the info message. Off: Choose "Off" to show the "searching" message. Background Color Use this feature to display a "Black"or "Blue" screen when no signal is available. LED Settings Refer to page 36. 34 Information Display the projector information for source, resolution, software version, color space and aspect ratio on the screen. Advanced Refer to page 37. LED Calibration Use this function to adjust LED color performance. Please wait for 10 seconds to 35 OPTIONS | LED Settings LED Hours Used Display the projection time. ECO Mode Choose "On" to dim the projector lamp which will lower power consumption and extend the lamp life. Choose "Off" to return to normal mode. Clear LED Hours Reset the lamp hour counter after replacing the lamp. 36 OPTIONS | Advanced Direct Power On Choose "On" to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the " " buton on the projector control panel or on the remote control. Auto Power Off (min) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when Keypad Lock When the keypad lock function is "On", the control panel will be locked. By selecting "Off", you will be able to reuse the control panel. 37 Media Arena Media Arena is an interactive PC-less presentation solution. Through SD card reader, USB connector and internal memory, you can easily access various photo, video and music media formats (See format supported table). The stylish user interface gives you the best experience while play- How to operate 1. Press the "Exit" button to back the main menu or previous folder. The tool bar displayed on the bottom will disappear in three seconds if there is no action. 38 Source Main Menu File Transfer/USB Display Internal Memory Source USB SD Card Photo Music Video Main Menu Setup Connect PC File Transfer/ USB Display File Transfer 39 Main Menu Sub Menu Settings 2. The End User may not: Make copies of the Picsel Products or make them available for use by third parties. or any copy or part of it in order to derive any source code, save only as is permitted by any applicable law. Picsel make no representations or warranties whether express or implied (by statute or otherwise) 3. excluded. in the end user license agreement. 40 Structure Main Menu Photo Music Video Office Reader Setup Sub Menu File List File List File List File List Photo Setting Display Ratio Slideshow Duration Slideshow Repeat Slideshow Effect Music Setting Play Mode Show Spectrum Auto Play Video Setting Display Ratio Play Mode Auto Play Firmware Upgrade Settings Auto / Full 5 Sec. On / Off Random / Snake / Partition / Erase / Blinds / Lines / GridCross / Cross / Spiral / Rect / Off Once / Repeat Once / Repeat / Random On / Off Off / On Auto / Original Size Once / Repeat Once / Repeat / Random Off / On SETUP Photo Setting Access the photo settings. Music Setting Access the music settings. Video Setting Access the video settings. Firmware Upgrade 41 SETUP | Photo Setting Display Ratio Press or to select the display ratio. the screen. [. . . ] Damage, deterioration, failure, or malfunction resulting from: product. Operation of the product for other than the normal intended use or not under normal conditions. For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to "Customer Support" page). To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. [. . . ]