User manual VIEWSONIC PJ550

[. . . ] PJ500/PJ550 PJ501/PJ551 User Guide Image Size 30" - 300" High Brightness Light Weight LCD Projector Contents For Your Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Projector Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Projector Components Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Remote Control Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] START UP On/Off START UP Screen: TURN ON TURN OFF The START UP screen is fixed screen displays when no signal is detected. This screen is active only when TURN ON option is selected from the START UP sub-menu. When TURN OFF is selected, the Blue blank screen displays when is no signal is detected. ViewSonic PJ500/PJ550/PJ501/PJ551 16 OPTION Menu The OPTION menu has 5 items as shown in the Table 9. Please select the item you want to operate with the / buttons and press the button or the ENTER button to start operating. Then you can operate according to the following table. Table 9: OPTION Menu Item VOLUME AUTO OFF Actions/Description Adjust Volume: Loud Quiet Adjust AUTO OFF Time: · Long (MAX. 1 min. ) · (DISABLE: 0 min. ) The system automatically enters the standby mode when no signal is received for the set time. Select WHISPER Mode: NORMAL WHISPER WHISPER The WHISPER mode is active when WHISPER is selected. In the WHISPER mode, acoustic noise level from the unit is reduced and the brightness level on screen is lowered. LAMP TIME Refer to Lamp Time: The starting of this item displays the time that the projector lamp has been used. Reset Lamp Time [Use this function only when the lamp is replaced!] : Keep pressing the RESET button for 3 seconds or more during the display of the lamp time. When you have replaced the lamp, select the RESET on the menu with the button. The message functions will not operate properly if the lamp time is not reset correctly. · Before replacing the lamp, carefully read the descriptions of "Lamp", "Lamp Life" and "Replacing the Lamp". FILTER TIME Refer to Filter Time: The starting of this item displays the time that the air-filter has been used. Reset Filter Time [Use this function only when the filter is replaced!] : Pres the RESET button for 3 seconds or more during the display of the filter time. When you have replaced the filter, select the RESET on the menu with the button. The message functions will not operate properly if the filter time is not reset correctly. · Before replacing the air filter, carefully read the descriptions of "Air-Filter" and "Replacing the Filter" on page 20. 17 ViewSonic PJ500/PJ550/PJ501/PJ551 Maintenance Lamp To order a new lamp unit see page 26 for contact information and see Table 15 for part numbers. Before replacing the lamp, turn the Power Switch OFF, remove the power cord from the power outlet, and wait approximately 45 minutes until the lamp has cooled. HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNINGS · Dispose of the used lamp according to local regulations. · Since the lamp is made of glass, do not drop the unit and do not scratch the glass. · If it is probable that the lamp has exploded (you have heard an explosive sound), disconnect the power plug from the power outlet and ask your dealer to replace the lamp. [. . . ] If a new plug is to be fitted, please observe the wiring code as shown below. IMPORTANT: The wires in this mains lead are coloured in accordance with the following code: Green-and-Yellow: Earth Blue: Neutral Brown: Live If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW. The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED. [. . . ]