User manual VICTORINOX SWISS ARMY NIGHT VISION II

[. . . ] The Night Vision II watch makes use of Light Emitting Diode (LED) for its flashlight and soft dial lighting. [. . . ] Extended Light Mode Two quick pushes of the pusher activates the white LED. Light will automatically deactivate after 2 minutes, or you can turn light off by pressing the pusher once. Signal Mode Three quick pushes of the pusher will cause the white LED light to strobe (150 p/min. Locator Mode Red LED locator beacon is positioned at the 6 o'clock marker and blinks once every 10 seconds. Battery End of Life Mode (EOL) Red LED locator beacon positioned at the 6 o'clock marker will flash 3 times every 10 seconds indicating lighting batteries should be changed. Battery Consumption Your Night Vision II timepiece has a built-in feature to protect battery consumption if the pusher used to operate the LED is accidentally pressed (for example in luggage or coat pocket, etc. If the pusher is pressed for more than 30 consecutive seconds, the lighting feature will shut off automatically. Please check the indication of water resistance on the case back of your Victorinox Swiss Army watch and carefully read the corresponding explanation from the following list: Water-resistant to 30 meters (100 feet/3 ATM). [. . . ] Please use an authorized Victorinox Swiss Army service center in the event either the light module or watch battery requires replacement. [. . . ]