User manual VDO DAYTON WT 5100 CONNECTION SCHEMA

[. . . ] 9 Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Mobile phones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The following display appears: Text can now be entered via the remote control with the aid of the keypad displayed. The number of characters that can still be entered is shown at the top right (in the illustration: 160). When the symbol is selected, the screen is changed to other available characters (1. If an incorrect entry is made, it is possible to delete the last character by selecting the symbol . In Write mode, by pressing the + button it is possible to enter a space. By pressing the - button it is possible to delete the preceding character. Enter the required call number in the following screen "Message send". 1 The required call number can also be taken from the phone book or, after pressing the button, can be entered with a voice entry of the relevant name. or, after a voice entry of the name, confirm the displayed 1 To use this function, the mobile phone must be prepared for sending short messages. 22 OPERATION Reading SMS messages 1 New incoming messages are displayed on the monitor. The message is displayed immediately after confirming the question "Read?" with OK. In the Start display, select the symbol (or the "Messages" option in the main menu). The "Phone book" menu then appears on the screen with the display of the phone book entry. Selecting the symbol permits a corresponding name to be spoken into the system, in order to enable use of the voice dial facility. 26 OPERATION Voice dialling Call numbers can be selected by saying the relevant name if appropriate entries have first been made in the system. 1 Call numbers and names are saved only in the system, not on the SIM card. The length of the spoken name is limited to approximately 1. 8 seconds. Voice dial menu To display the menu: 1. Call up the main menu (press MENU button once in the Start display, otherwise twice). The "Voice dial menu" is displayed. The options have the following meanings: "List" View or listen to entries "Dial from list" Listen to names and dial call number, if desired "Add entry" Save a new entry "Delete" Delete an entry from the memory "Back" Return to the main menu List - Display / listen to entries After the "List" option has been selected, all the call numbers are displayed in turn and the associated names are played back. 1 If a name is also displayed on the screen next to the call number, the displayed details are saved in the phone book (on the SIM card). 27 English OPERATION Dial from list After the "Dial from list" option has been selected, the first call number is displayed on the monitor, the associated name is played back. When the required entry is reached, the associated call number can be selected by choosing the symbol . Add entry After the "Add entry" option has been selected, a display appears for entering the call number. Enter the call number; if an incorrect entry is made, the last characters can be deleted by selecting the symbol . 1 For the best results, allow a small pause between the tone and saying the name. Names should not be too short and should be clearly and audibly distinguishable from one another. [. . . ] Insert the 15-pole plug of the telephone holder into the corresponding socket on the control unit. Connect the GSM antenna (not included) to the antenna connection of the phone holder. Insert the 10-pin plug of the Y-cable into the corresponding socket on the rear of the control unit. With MS 3100/PC 4000 navigation system installed: If necessary, pull the plug of the remote control holder out of the connector in the signal cable of the navigation system. [. . . ]