User manual VDO DAYTON TVA 5100

[. . . ] TVA 5100 Mounting instruction Manuel d'installation Einbauanleitung Inbouwhandleiding Istruzioni d'installazione Instrucciones de montaje Monteringsanvisning Dansk Svenska Español Italiano Nederlands Deutsch Français English Read this manual carefully before starting operation and use this system safely. We can not be responsible for problems resulting from failure to observe the instructions in this manual. [. . . ] Cables or wiring that obstructs or hangs up on places such as the steering wheel, gear lever, brake pedals can be extremely hazardous. Do not install in locations which might create hazards for the vehicle occupants or hinder vehicle operation (such as the steering wheel or gear shift) by obstructing forward vision or hampering movement etc. A CAUTION Use specified accessory parts and install them securely. Use of other than designated parts may damage this unit internally or may not securely install the unit in place as parts that come loose can create hazards. Failure to make the correct connections can cause fire or accident to occur. Route the cables and wiring so as not be crimped by moving parts like seat rail or make contact with sharp or pointed spots which might damage the wiring. If they come loose, an accident or injury to persons could result. 3 English Points to observe for safe usage Usage precautions ­ This double antenna is for the VDO Dayton TV tuner TV 5100 only. It cannot be connected to the car radio. ­ Do not wipe the antenna or cables with alcohol, benzene, thinner, gasoline, or other volatile substance. This could deform or discolor the antenna or cable. Scope of delivery 2 6 Antenna units Cable clamps Specifications Frequency range . 4 m * These specifications and designs are subject to change without notice for improvement purposes. Mounting precautions ­ Double-sided self-adhesive pads are used to mount the antenna units to the inside ­ ­ ­ ­ glass side of the rear windows. The self-adhesive pads cannot be re-affixed, and so make completely sure that the mounting location is correct. Do not mount the antenna units in a location obstructing the field of view during driving, such as the front window. Failure to do so can not only reduce the adhesive strength of the self-adhesive pads, it could also cause the tape to peel off. [. . . ] During this time, be careful not to expose the antenna to water or apply pressure on the antenna. Connect the antenna cables to the car TV tuner. 5 English Mounting procedure Connections The cables of both antenna units are connected as shown below. Connect to 12 V Accessory (switched 12 V) Fuse POWER 0, 5 A + 12 V GROUND Connect to a suitable ground (car body) Connect to the antenna input of the TV tuner Hotline For answers and questions concerning VDO Dayton Multimedia Systems there is a Hotline available in many countries. G Q 0121 344 5400 1 800 335 282 Toll Free or (03) 94503166 Subject to technical modifications and errors. 6 TVA 5100 09/2001 ri [. . . ]