User manual VDO DAYTON RV 5200

[. . . ] RV 5200 Bumperfit Color Rearview Camera Installation and operating instructions Safety precautions ATTENTION: A A Consult with your authorized car dealer if installation requires the drilling of holes or other modifications of the vehicle. [. . . ] reasons! A A Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, handbrake and seat rails. Do not route wiring in places that get hot, such as near the heater Use only the parts included with the unit to ensure proper installation. outlet. Scope of delivery 1 1 1 4 1 Camera with 1. 5 m connection cable 6 m Extension cable (also available as an accessory) Mounting bracket (incl. screws and washers) Self-tapping screws Short instructions (English language) © 2006 Siemens VDO Trading GmbH All rights reserved. Bumperfit mounting 1 Front ring 2 Tilt adjustment ring (optional) 26 mm Ø Align dot to the top 3 O-ring (small) 4 O-ring (large) 5 Tilt adjustment ring (optional) 6 Clamping ring 7 CCD camera 1 2 3 Bumper 4 5 6 7 8 8 Connector 9 Screw 3 mm 0 Spring washer q Toothed washer w Bracket base e Bracket r 4 self-tapping screws for bracket base fixation 13 12 11 10 9 2. Mounting with bracket Align dot to the top 1 2 3 14 4 5 6 7 8 2 Pin assignment PIN No. [. . . ] 1 2 3 4 5 Description + 12 V DC power supply CVBS Video output Not connected Not connected Ground Application examples 1) Direct connection to Monitor Navigation System with adapter cable 2) Connection to Multimedia System via MI 2200 3 Specifications Video standard . [. . . ]