User manual VDO DAYTON PN 2050

[. . . ] 48 26 General Instructions Safety Advice and Important Information Before you start to mount and use this navigation system, please familiarise yourself with its various components and functions. Furthermore, please read through the safety instructions carefully to avoid causing injury to yourself and/or other road users. The use of the navigation system does not under any circumstances release the driver from his/her personal responsibility. The applicable road traffic regulations and current traffic conditions always have priority. [. . . ] If you want to reset your system tap Factory defaults. BT settings These settings are only available by using the optional BT cradle and mounting the navigation device in this cradle. Updates can change the structure of the menu. GPS and TMC Toolbar The toolbar is a shortcut to different functions and information (e. g. You can open and close the Toolbar by tapping the bottom right of screen. 37 GPS Status and Quality When you switch on the device for the first time, it can take several minutes for the GPS reception to reach a sufficient level and to determine your current position. If you are unable to obtain a sufficient GPS signal, please read the Troubleshooting chapter for suggestions on solving the problem. If you are using the navigation system in an inner-city area, it may take longer to refresh the map items on screen. This is due to the large number of roads and additional information (e. g. Furthermore it may take longer to establish the GPS reception if you have just driven out of an underground car park or another type of building where GPS signals are blocked. The GPS reception can be checked by doing the following Check the GPS status in the status bar. In case the status bar does not show the GPS status: tap on a status bar element and select GPS status from the list. The amount of tracked GPS satellites is shown. The quality of the GPS signal is indicated by the shape and colour of the check mark: Red Yellow Yellow Green No reception Initializing or insufficient signal quality, less than 3 satellites found Sufficient signal quality, but not very accurate position Good signal quality, accurate position 38 GPS and TMC (only for TMC cradle) Using TMC offers you an additional function to allow you to dynamically avoid traffic jam. During navigation the system regularly accesses the latest TMC traffic information in the background; provided that this information is available in the part of the country you are in. TMC is switched On, the traffic information is known and send by the provider, the information can be received. TMC Status and Quality When you set TMC On and there is no reception, a red checkmark is shown. When you receive TMC, the name of the provider is shown green in the status bar. If TMC is switched Off, no provider is shown and a narrow line is visible. When TMC is switched On and you receive traffic information, the status bar also visualises the delay time. This is indicated by the colour of the hourglass: Red There is TMC information and delay time Green There is TMC information but no delay time Grey TMC is not available or switched off (only for traffic product version) When TMC is switched On and there is a traffic jam on your route, a pop up icon appears in the left corner on the map display screen. Tap this icon and a list of detailed information appears. Remote Control Remote control RCS 5100 (optional) 39 With the remote control placed on your steering wheel, you can easily operate the navigation system while driving. 1 2 3 4 5 6 7 If you press this button briefly the voice message will repeat itself. Pressing this button decreases the volume of the navigation voice advice. In setting screens with sliders it will decrease the selected slider value. Pressing this button increases the volume of the navigation voice advice. In setting screens with sliders it will increase the selected slider value. 40 Navigation Navigation The purpose of the navigation system is to guide you from your present location to your desired destination. The navigation function automatically determines your present location using the GPS signal. [. . . ] During the Song setting (the list of titles in the alphabetical order) this function refers to all titles. By tapping the left up arrow you return to the main menu. 46 Multimedia Tap the Picture-Viewer button. · On the screen, you will see the picture and the number of the picture in the upper bar within the corres-ponding folder. Viewing Pictures ­ The Picture-Viewer By tapping the symbols on the left in the selection menu you can perform following functions: Slide Start slide show >> File Jump to next picture << File Jump to previous picture >> Folder Switch to next folder << Folder Switch to previous folder Browser Tap the Browser button to open a file browser where you can choose your pictures By tapping the left up arrow you return to the start menu. If you tap on the picture, the image is displayed in full screen mode. [. . . ]