User manual VDO DAYTON MS 4200 RS

[. . . ] Owner's manual and mounting instruction Mode d'emploi et manuel d'installation Bedienungs- und Einbauanleitung Gebruiksaanwijzing en inbouwhandleiding Istruzioni d'uso e d'installazione www. vdodayton. com Italiano Nederlands Operating Software MO 4254 Deutsch MS 4200 RS Français English SDVC [A1] [A3] [A2] A [A6] [A8] [A7] B [A5] [A4] +12V RR FR FL RL Power Amplifier Tel. in TMC receiver Remote CD Changer J B' A' F E B A F 14 +30° -10° CONTENTS Contents NEW OPERATING SOFTWARE MO 4254. Route & Sound ­ Navigating and listening to an audio CD How does the navigation system work?17 17 17 17 18 19 20 20 20 20 20 21 21 21 21 21 22 22 23 24 24 24 24 25 26 27 OPERATION . [. . . ] Select the desired CD from the list. Select CD CD Title Assign a name with up to 13 characters to the CD currently playing. The CD will be recognised automatically by the CD changer, and the CD changer will display the CD title. If your CDs have CD text, you can also overwrite the CD title displayed. Once the memory is full, you will have to first select a title to be deleted before you can enter a new one. Changer Setup: Set one of the following functions. increase it for quieter sections. ­ Compression: If activated, this function will reduce the volume for loud sections and ­ Comp. This function is only available with compression activated. ­ CD Access: Indicate if you want to choose the CD in the menu "Select CD" by number or by title. Extra Info Displaying information on the currently selected CD: ­ Number of the selected CD (in magazine), ­ CD title (if available), ­ total number of tracks, ­ total duration and ­ the selected sound type for CD changer mode. Initialisation See "INITIALISATION" page 39. 38 INITIALISATION The "INITIALISATION" menu Select "Initialisation" in one of the following : menus: "RADIO", "INFORMATION", "CD" or "CD CHANGER". The "INITIALISATION" menu is displayed. The "INITIALISATION" menu allows you to adjust the navigation radio to your needs. The following functions are available: INITIALISATION Beep Level: 1 Clock Settings Scan Time: 15s On Off Logic Telephone Adapt your unit's telephone input to your car phone: ­ NONE: No car phone is connected to the unit. ­ MUTE: Playback on the current source is automatically interrupted when your car ­ phone is in use. For this purpose, the car phone's muting signal must be connected to the device (see installation instructions). IN: Playback on the current source is automatically interrupted and the incoming call is played through the car loudspeakers. For this purpose, the car phone's muting signal and audio output must be connected to the device (see installation instructions). Tel Signal: Adapt your unit's telephone input to the muting signal of your car phone: ­ LOW: Muting signal "active low". Level: Adapt the car phone's volume to the navigation radio's telephone input. The volume adjustment can be set to between ­30 and +30. Beep Type Select a confirmation/alert sound. You have the choice between 4 different sounds. Beep Level: Set a level between 1 and 5 for the confirmation/alert sound. Clock Settings Setting the time, the time format and the time zone: ­ Clock Type: Select either RDS or GPS. With GPS, the time of day is received via the Global Positioning System in UTC. With RDS, the time is synchronised with the data of the currently received RDS station (the time signal transmitted by the RDS stations may be incorrect). ­ Timezone (only for GPS clock): Set the time difference to UTC (equivalent to Greenwich Mean Time, London). Scan Time Setting for the scan time for frequency, storage or track scanning. Choose 5, 10 or 15 seconds. 39 INITIALISATION On Off Logic Activate this function to limit the operation of the device to one hour after the ignition key is removed. Display Setting the display contrast and display brightness (day and night settings). Set the required contrast and brightness for the display in order to optimise the legibility of the text in accordance with lighting conditions. The brightness night setting can only be applied if the vehicle lighting has been switched on (see also installation instructions). User Setting the user mode for radio, CD and CD changer. Select either "COMMON" or "EXPERT". Icons Choose either "STATIC" (immovable) or "ANIMATED" (moving) symbols for operation of the radio or another sound source. Loudspeaker Test Activate this function to control the loudspeaker connections and positions. [. . . ] Unit not functioning / Not suitable for VW/Audi vehicles Display still showing "INIT". Radio Poor radio reception. 70 TROUBLESHOOTING Symptoms Navigation Display shows "Please insert map CD". The map CD is required for some functions in navigation mode and for route planning. · Insert the C-IQ map CD into the radio CD drive with the label facing upwards. [. . . ]