User manual VDO DAYTON MS 2010 TRAFFIC INSTALLATION MANUAL

[. . . ] Installation Manual Application Software New Application Software for MS 2110 Traffic/MS 2010 Version A21-070112r1 How to perform the update The files required for the update are stored as compressed data in a Zip file for free download from our internet site. [. . . ] § Download the file "MS2x10_A21-070112r1. zip" from the internet onto to the HDD of your computer o Extract the zip archive and copy all files 1:1 onto an empty SD card (Do not add or leave any files) Note: Do not use other decompression software than WinZip since it may cause errors. Before formatting, make sure that there are no other files on the SD card that you may want to use later. 2GB § § § § § § § § § § § § Make sure the MS 2x10 is charged by connecting either the 12V/24V car charger or 110V/230V mains power adaptor. Switch off the MS 2x10 by pressing the on/off button for longer than 3 seconds Take out the SD Card containing the map data and insert the update SD Card Switch on the MS 2x10 by pressing the on/off button for longer than 3 seconds The system starts with the SD Upgrade screen Press "Start" The application software update starts and will take about 3 minutes The update has finished when both bars of the SD upgrade screens shows 100% Switch off the MS 2x10 by pressing the on/off button for longer than 3 seconds Note: The "Exit- button" in the SD Upgrade screen does not work!Take out the SD card and insert the map data SD Card again Switch on the MS 2x10 by pressing the on/off button for longer than 3 seconds. If this does not work, please press the reset button of the MS 2x10 The update process is now finished. [. . . ] MS 2x10 System identification should show now GUI A21-070112r1 Improvements: · · · · Additional skins 2 Games added (Blockbuster & Sudoku) "privacy" functionality added (deleting all addresses or back to factory settings) Improved system stability [. . . ]