User manual VDO DAYTON DTV 6500

[. . . ] Bedienungsanleitung User manual Mode d'emploi Gebruiksaanwijzing Istruzioni d'uso Betjeningsvejledning Instrucciones de manejo Dansk Español Italiano Nederlands Deutsch DTV 6500 Français English Sample System AV Source: DVD* / Camera* / Game Console*, etc. grey Handbrake 2 Antenna Set: TVA 6500* red + 12 V - 24 V ACC MM 2700* yellow 1A 12 V 24 V R ­ AUDIO IN ­ L ANT IN 1 ANT IN 2 VIDEO IN DC 12-24 V ACC BAT IR Remote Receiver black SAFETY ANT PWR GND R ­ AUDIO OUT ­ L VIDEO OUT 12 GND Set to "ON" with TVA 6500 IR Receiver Radio* (AUX IN) / IR Transmitter WT 5100* / etc. Notes in installation and operating instructions Safety instructions . . 3 4 4 4 4 5 5 6 6 7 7 7 9 9 12 12 13 13 13 15 16 18 Initial operation . [. . . ] Programme selection can also be accomplished using keys 8 and 2 on the remote control. Direct input via number keys Enter the desired channel number using the number keys. When entering channel numbers of 10 and above, you have about 1 second after pressing one number key to complete the entry. To switch back to the last channel - SWAP Press the SWAP button to switch back to the last channel selected. Press the SWAP button again to go back to the programme you were watching before. English 14 Operation Selecting a channel from the channel list Press the OK or LIST buttons while in TV mode. Using the 8 or 2 button select the required channel and confirm this with OK. Press the OK button again to close the channel list and view the selected channel in full-screen mode. Selection of a favourites list It is also possible to select your favourite channels from all the channels available and collect them in a list of favourites. To create favourites lists, see under "Favourites lists", on page 16. The DVB tuner always switches to the last programme selected from the favourites list you have chosen. If no favourites list has been created, the PRF+ and PRF- buttons have no function. Info display (Info window) Every time you change to a new channel a window with information on the selected channel is displayed for a few seconds. The length of time that this information is displayed can be set to between 3 and 10 seconds in the system settings menu. The information displayed is as follows: Channel number (from the current list of channels) Channel name A bar indicating how long the current programme has been showing. Symbols for encryption and the availability of sub-titles, dual-channel sound and teletext The info window can be displayed or hidden at any time by pressing the Info button. Press the Info button while the info window is already being displayed to view additional information on the current programme. Press the Info button again to hide the supplementary information window again. When the tuner is switched out of stand-by mode, the previous volume setting is readopted. Press the Mute button again or press any VOL button to turn on the sound again. Operation 15 TV/Radio mode Press the TV/Radio button to switch between TV and radio reception. In TV mode you can only receive TV channels and in radio mode, only radio stations. Please note that not all countries have radio stations that transmit via DVB-T. Selecting audio language and audio mode TV and radio stations may transmit alternative sound channels for a programme (e. g. If various sound channels are being transmitted, you can select the one you want. [. . . ] TV standard PAL: The TV signal is output according to the PAL standard (if the connected screen accommodates PAL format). NTSC: The TV signal is output according to the NTSC standard (if the connected screen accommodates NTSC format). SECAM: The TV signal is output according to the SECAM standard (if the connected screen accommodates SECAM format). TV audio: Stereo Mono Time Settings The "Time Settings" menu allows you to set the time difference between local time and the received world-wide universal (UTC) time. [. . . ]