User manual US ROBOTICS 56K PCI FAXMODEM V92

[. . . ] Robotics Corporation 935 National Parkway Schaumburg, Illinois 60173-5157 USA No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as a translation, transformation, or adaptation) without written permission from U. Robotics Corporation reserves the right to revise this documentation ad to make changes in the products and/or content of this document from time to time without obligation to provide notification of such revision or change. Robotics Corporation provides this documentation without warranty of any kind, either implied or expressed, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. If there is any software on removable media described in this documentation, it is furnished under a license agreement included with the product as a separate document, in the hard copy documentation, or on the removable media in a directory named LICENSE. [. . . ] In addition, if you subscribe to Caller ID service, the number of the incoming call will be displayed in the computer's message window. If you choose to accept the call, another message will appear notifying you of the length of time that the provider's system will wait on hold before the data connection is terminated. You can then return to the connection when the call is completed without losing the connection. If you choose to accept the call, your data connection will be terminated. Follow the on-screen instructions to complete the installation of the software. When you register your modem online, USRobotics will use your information to: • Inform you of future product support notices, alerts, and changes to our support offerings. €¢ Invite you to participate in market research, new product definition studies, and beta test programs. USRobotics will not sell or provide any personal information that identifies you or any individual to any outside source. Select Product Registration and click the link to register your modem. Com/productreg You can also register your modem online at Uninstallation Instructions Step 1: Uninstall the modem drivers. CAUTION: To avoid the risk of electrical shock, make sure your computer and all peripheral devices are turned off and unplugged. Disconnect all telephone cables from any existing modems before opening the computer’s cover. Touch an unpainted metal area of your computer’s case to ground yourself, which protects your equipment from electrostatic discharge. Unplug your computer and disconnect all telephone cables from any modems. Troubleshooting If you have any difficulty with your modem, first make sure that it was installed correctly. Make sure that your modem is physically installed correctly in your computer. With your computer turned off, you will need to press the modem in firmly so that it is seated properly in its slot. When the modem is installed correctly, you will no longer see any part of the gold edge. If your modem still does not work, turn off your computer, remove the modem, and reinstall it in another PCI slot. 6 If you do not see the System icon, make sure you are in Classic View by clicking Switch to Classic View on the upper left side of the window. If it is still not listed, go to the next Troubleshooting category in this guide, “My computer isn’t recognising my modem. If it is still not listed, go to the next Troubleshooting category in this guide, “My computer isn’t recognising my modem. [. . . ] The phone cord should be plugged into the jack on the modem and into the wall jack. Use the phone cord included in your modem’s box, if possible. Possible solution: You may have devices between the modem and the phone jack. There should be no line splitters, fax machines, or other devices between the modem and the wall jack. [. . . ]