User manual UMAX MIRAGE IISE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual UMAX MIRAGE IISE. We hope that this UMAX MIRAGE IISE user guide will be useful to you.
Manual abstract: user guide UMAX MIRAGE IISE
Detailed instructions for use are in the User's Guide.
[. . . ] UMAXMirage IIse
Color Scanner
Operation Manual
Thank you for purchasing the color scanner. With this color scanner, you can easily scan A3 size documents and photographs into your computer and maintain them as electronic copies. High Resolution and Density Range: With a resolution of up to 9800 dpi, it produces better gamma transformation, and a more accurate detection of highlight and shadow details, thereby allowing even distribution of colors. High Scanning Speed, Low Acoustic Noise: The scanner's micro stepping technology greatly increases scanning speed and at the same time reduces noise level. [. . . ] When one or more of these frames are placed on the scanner's object glass and the "Scan" button is clicked, the scanner will automatically detect the existence of each frame, using the orientation holes for reference, and will only include what is within each Scan Frame in the resulting scanned image. Ensure the Transparency Adapter is fitted before proceeding with the scan. Select a Scan Frame size which will hold the original source document without covering up the orientation holes. Select the "Frame Holder Detection" option from the MagicScan. For detailed information on using frame holder, refer to your MagicScan user's guide. Open the Scan Frame and place the source document inside, taking care not to cover the orientation holes.
5. 6.
Lift up the Scanner's transparency adapter and place the Scan Frame on the scanner's object glass. Carefully align the Scan Frame so that it's exactly parallel with one of the rulers bordering the scanner's object glass. You can easily do this by simply placing the Scan Frame against one of the rulers.
Note: Although misalignment will not prevent the scanner from scanning, portions of the Scan Frame may appear in the resulting scan if the frame is not perfectly aligned.
8
Multiple Scanning Using the A3/ 35mm Slide Tray 1. Place the transparencies into the slide holders on the slide tray.
2. 3.
Lift up the A3 Scanner's transparency adapter and place the Slide Tray on the scanner's object glass. Line the orientation holes up in such away that the entire tray fits on to the object glass and the slide tray borders line up with the rulers on the scanner's object glass. Note: Although misalignment will not prevent the scanner from scanning, portions of the Slide Tray may appear in the resulting scan if the frame is not perfectly aligned.
4.
Repeat steps 1 through 3 for placement of additional slides
9
Chapter 3: PC Installation
This chapter describes how you can connect and use the scanner with your IBM PC or compatible computer.
Interface Card Installation
Before you can use your scanner with your computer, you need to install the interface card into your PC. If your interface card is a UMAX proprietary card and has I/O Base Address dip switches on it, refer to the document comes with your interface card for confirm or reset the I/O base address. Then proceed with the instructions found in the next section for installing the card in the computer. does not have dip switches on it for selecting the I/O base address), install the interface card in the computer as described in the next section.
2.
To install the card into one of the computer's expansion slots, observe the following procedures: Note: The interface card is sensitive to static electricity. Handle the card by its mounting bracket, particularly when removing the card from its anti-static packaging. Keep the removed screw so that it can be used to fasten the interface card. Gently insert the interface card into the slot until it is firmly seated in the slot.
5. 6.
Secure the card in place with the screw removed from the expansion slot cover in step 3 above. Replace the housing cover following the instructions provided in the computer's reference manual.
10
Connect the Scanner to the Computer
With settings on the scanner and card correctly set and the interface card properly installed in your computer, you can now connect the scanner and the computer, as follows: 1. Note: If your SCSI card is not UMAX brand, you have to use other 50-pin port (50-50 pin) cable connector for connecting to your interface card. [. . . ] Software that is used to perform a specific function, e. g. , image processing, OCR (Optical Character Recognition), or DTP (Desktop Publishing). A 1-bit image file capable of displaying only black and white image data with no intermediate gray levels. A small switch mounted in or on computer equipment that sets certain parameters. A connector and bracket system in a computer into which an expansion or interface card can be inserted to add functions to a computer system. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE UMAX MIRAGE IISE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual UMAX MIRAGE IISE will begin.