User manual ULTIMATE SPEED KH 3017

[. . . ] Check that all parts have been assembled and fitted properly and are undamaged. Before each use check that the hydraulic vehicle jack is working properly. [. . . ] Check the screws and valves of the hydraulic vehicle jack for correct seating and look out for hydraulic oil leaks in particular. Make sure that no-one ­ especially a child ­ is in the vehicle and that everyone is kept at an adequate distance away from the vehicle when the hydraulic vehicle jack is in use. Make sure that no petrol, battery acid or any other dangerous substance can flow out of the vehicle when the vehicle is being lifted. Make yourself familiar with all the operating instructions and safety advice for the product before use. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it. Saddle Extension screw (for saddle) Lever socket Safety valve Release valve Tube section with locating slot Tube section with pin Pumping lever It is forbidden to lift people with this appliance. Restrictions on use: Other uses of or changes to the hydraulic car jack, as mentioned before, are not as intended and could lead to risks such as injuries and damage. A) until the vehicle moves downwards but not enough that hydraulic oil escapes from the release valve 5 . Lower the vehicle slowly otherwise there is the danger of injury and damage to the product or to the vehicle. The vehicle jack to pieces yourself may result in it not working properly. Follow these steps: j irst raise the vehicle slightly in order to be able to remove the F axle stands. J lace a tube section with locating slot 6 on to the release valve 5 . O J nly the appropriate service centre is allowed to replace spare O J n all cases of malfunction or necessary repairs, contact the servI Parts and/or carry out repairs. Enquire at your city council or local government regarding the possibilities of disposing of old oil and hydraulic oil as well as the disused product in a correct and environmentally friendly way. [. . . ] O J nly the appropriate service centre is allowed to replace spare O J n all cases of malfunction or necessary repairs, contact the servI Parts and/or carry out repairs. Enquire at your city council or local government regarding the possibilities of disposing of old oil and hydraulic oil as well as the disused product in a correct and environmentally friendly way. [. . . ]