User manual TRIMBLE SURVEY PRO 4.10.0 RELEASE NOTES REV A

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TRIMBLE SURVEY PRO 4.10.0. We hope that this TRIMBLE SURVEY PRO 4.10.0 user guide will be useful to you.


TRIMBLE SURVEY PRO 4.10.0 RELEASE NOTES REV A: Download the complete user guide (35 Ko)

Manual abstract: user guide TRIMBLE SURVEY PRO 4.10.0RELEASE NOTES REV A

Detailed instructions for use are in the User's Guide.

[. . . ] The road can then be staked using the road staking tools just like a road loaded from an RD5 file except the road definition cannot be modified on the data collector. Added a new feature that allows real-time coordinate and measurement data to be output via Bluetooth or a COM port on the controller for use outside of Survey Pro. The data is in a simple XML format and can contain just coordinate information for new points, measurement data for stored points, or both. [. . . ] More options are automated or selected once and then remembered for all new jobs. Added a setting to allow averaging of measurements on Nivo C and FOCUS 8. Added a setting to control the laser plummet intensity on Nivo C and FOCUS 8. Added a descriptor field on the NEZ tab of the Remote Control screen for foresight measurements. The Survey Pro All CAPS option will be ignored when entering passwords. Added a fly-out button to switch back to countdown mode while staking using the Quick Stake screen. Added new information on the Face 2 Screens of Nivo C, FOCUS 8 and FOCUS 30 for supporting repetition shots. Added a Static IP base modem option to better support IP to IP modem GNSS surveying. General Improvements · · · Improved the behavior of the Lumi-Guide for Nivo and FOCUS 8. Calibrated the Survey Pro out of level sensitivity so the level bubble screen will not appear when turning the instrument during repetition shots with the On-board software on Nivo C and FOCUS 8. Chinese and Russian languages on the Nivo C and FOCUS 8 no longer draw incorrect characters on the Face 2 screen. F 3 · · · · · · · · · · · · · · · · Improved the overall stability of the EPOCH 25 instrument driver. Stake DTM feature no longer has a longer than expected delay before recording data. Survey Pro will now get the initial base position when doing VRS with CMRx corrections. Survey Pro no longer plays the error sound when entering the position display screen. Network Fixed and Fixed GNSS displays are now differentiated for EPOCH 35. Removed the CR5 file as an open from the File Open menu to preclude accidentally overwriting an existing job. Fixed an issue were on certain networks, Survey Pro could not properly configure and connect to certain RTCM 3. Net data streams. [. . . ] The Survey Pro 4. 10 installation program will use an Internet connection to verify the serial number of the data collector for warranty coverage. If the unit is not covered, you can continue the installation, but the software will only work in demo mode on the data collector until a warranty is purchased. You can also choose to discontinue the installation and keep the fully licensed version that is currently installed on the unit. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TRIMBLE SURVEY PRO 4.10.0




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TRIMBLE SURVEY PRO 4.10.0 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.