User manual TRIMBLE JUNO RELEASE NOTES V1.04.09 REV A

[. . . ] RELEASE NOTES JunoTM Series Handhelds Operating System Introduction New Features and Changes Documentation Version 1. 04. 09 Revision A July 2010 F Trimble Navigation Limited 10355 Westmoor Drive Suite #100 Westminster, CO 80021 USA www. trimble. com Legal Notices For a complete list of all relevant legal notices regarding this product, please refer to the Juno Series User Guide. Trimble and the Globe & Triangle logo are trademarks of Trimble Navigation Limited, registered in the United States and in other countries. [. . . ] You can identify which version is installed by referring to the ROM version listed in /Settings/System/SystemInfo/OS version. Trimble strongly recommends that you update any existing Juno SB and Juno SC handhelds to version 1. 04. 09 of the operating system. To download and install the new ROM version, see Upgrading to the 1. 04. 09 ROM version below. The following changes were made in the 1. 04. 09 ROM version: · · · Improvements to the Wi-Fi channels used (channel 1-11) Improved information when SDMMC cannot be read Juno series handhelds will now charge when they are connected to a computer using a USB cable Upgrading to the 1. 04. 09 ROM version This section describes how to upgrade your Juno series handheld to the ROM version 1. 04. 09. C CAUTION ­ This update re-installs the operating system, and resets your device to factory defaults. This will erase ALL data, installed applications, and settings stored on the handheld, except for any data or applications that are part of the operating system or are stored on a memory card. To quickly and easily restore data, synchronize the handheld with a computer before performing the update. Once the update is complete, resynchronize the handheld with the computer. 1. Download the operating system upgrade file to an office computer: a. Go to the Support page of the Trimble website (www. trimble. com/support. shtml). Click the link for either model of Juno series handheld (Juno SB or Juno SC) Juno Series Handhelds Operating System Release Notes 3 Note ­ The ROM version is the same for both models. Click v1. 04. 09 ­ Juno SB / SC, Operating System to download the upgrade file. Unzip the upgrade file; there will be a TRIMBLE folder (containing the files BIOS. SIG, chain. lst, and flash. sig) and the ImageUpdate executable. Transfer the upgrade files from the computer to the handheld. Both the TRIMBLE folder (containing the three files listed above) and the ImageUpdate. exe file must be saved to the root directory of a MicroSD memory card. To transfer the upgrade file from the computer to the MicroSD card in the handheld, use any of the following methods: ­ ­ ­ connect to a USB port on the computer a Bluetooth® wireless connection to the computer a wireless LAN connection If you use either the USB port or Bluetooth wireless technology, connect the handheld and the computer and then use Microsoft ActiveSync® technology or the Windows Mobile Device Center to establish a relationship between the two devices. [. . . ] The Trimble website has FAQs and support notes covering technical issues. To view or download these documents, go to www. trimble. com/junosb. shtml or www. trimble. com/junosc. shtml, and then click the Support link. Juno Series Handhelds Operating System Release Notes 5 6 Juno Series Handhelds Operating System Release Notes [. . . ]