User manual TRIMBLE HYDROPRO 2.40 DATABASE DOC REV A

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TRIMBLE HYDROPRO 2.40. We hope that this TRIMBLE HYDROPRO 2.40 user guide will be useful to you.


TRIMBLE HYDROPRO 2.40 DATABASE DOC REV A: Download the complete user guide (253 Ko)

You may also download the following manuals related to this product:

   TRIMBLE HYDROPRO 2.40 RELEASE NOTES REV A (714 ko)

Manual abstract: user guide TRIMBLE HYDROPRO 2.40DATABASE DOC REV A

Detailed instructions for use are in the User's Guide.

[. . . ] DATABASE DOCUMENTATION HYDROpro Software TM Version 2. 40 Revision A October 2010 F Trimble Navigation Limited Construction Business Area 5475 Kellenburger Road Dayton, Ohio 45424-1099 USA 800-538-7800 (toll free in USA) +1-937-245-5600 Phone +1-937-233-9004 Fax www. trimble. com E-mail: trimble_support@trimble. com Copyright and Trademarks © 2002­2010, Trimble Navigation Limited. For STL support, the software uses the Moscow Center for SPARC Technology adaptation of the SGI Standard Template Library. Copyright © 1994 Hewlett-Packard Company, Copyright © 1996, 97 Silicon Graphics Computer Systems, Inc. , Copyright © 1997 Moscow Center for SPARC Technology. Trimble, the Globe & Triangle logo, Geodimeter, and Terramodel are trademarks of Trimble Navigation Limited, registered in the United States Patent and Trademark Office and other countries. [. . . ] 0 = No, 1 = Yes. VisualLinks The VisualLinks table is defined below. Field VisualLinkId VisualLinkName FromVesselId FromOffsetId ToGOPointId ToVesselId ToOffsetId AnnotationPos ColorKey SpecifiedColor LinkLineStyle LinkLineWidth LinkVisible DependentStatus Description Unique internal visual link identification number. If the point status is selected, then link will be visible as specified. 0 = None, 1 = Surveyed, 2 = Up, 3 = Down. Events Created on project creation. Field TimeStamp Change IsCurrent EventConfigId Description Timestamp for tracking user changes. Internal reference ID number assigned to that particular configured event. 22 HYDROpro Software Database Documentation Category Specifies both the category (hundreds) and the sub-category (units). Categories: 000 = Interval, 100 = User, 200 = Log State, 300 = Guidance Object, 400 = Digital. Interval sub-categories: 0 = Time from Log On, 1 = Time from Start of GO, 2 = Distance from Log On, 3 = Distance from Start of GO. Guidance Object sub-categories: 0 = At Start of GO, 1 = At End of GO, 2 = At Waypoint, 3 = At Start of Leg, 4 = At End of Leg, 5 = At Start of Segment, 6 = At End of Segment. Digital sub-categories: 0 = Not Specified, 1 = Activate, 2 = Deactivate, 3 = Any. For position events, it is a unitless integer value in the range 1. . . max int. Internal reference number assigned to the Digital service used by Digital event. LongEventName ShortEventName Active EventCodeType StartEventCode NextEventCode PrependGOName Increment SymbolId Indicator SteerbyId Interval ­ Double EarlyEventMode EarlyEventAdjust EventAtStart EventAtEnd LeadinEvents RunOut OccursOutOfLimits AllowRerun NextEventMark CSId EventActions Created on project creation. This table is independent of the user interface. Field TimeStamp Change IsCurrent Description Timestamp for tracking user changes. 0 = No, 1 = Yes. HYDROpro Software Database Documentation 23 Field ActionId Description Action to be performed. Log Event Data (0), Annotate Echo Sounder (1), Auto Log On (2), Auto Log Off (3), Auto Toggle Logging (4), Next (5), Prior (6). Categories: 000 = Interval, 100 = User, 200 = Log State, 300 = Guidance Object, 400 = Digital. Interval sub-categories: 0 = Time from Log On, 1 = Time from Start of GO, 2 = Distance from Log On, 3 = Distance from Start of GO. Guidance Object sub-categories: 0 = At Start of GO, 1 = At End of GO, 2 = At Waypoint, 3 = At Start of Leg, 4 = At End of Leg, 5 = At Start of Segment, 6 = At End of Segment. Digital sub-categories: 0 = Not Specified, 1 = Activate, 2 = Deactivate, 3 = Any. Internal reference ID number assigned to that particular configured event. Internal reference number assigned for the service specified in the Annotate Echos Sounder or Digital actions. Internal reference ID number assigned to that particular configured echo sounder service or service group for the Annotate Echo Sounder or Digital actions. Echo sounder service Data Source for the Annotate Echo Sounder or Digital actions. Steer-by identifier used by the Annotate Echo Sounder or steer-by actions. [. . . ] The Output Format ID to use for the body, header, or footer format in the real-time report. Set to 0 if the body format has not been selected or if the selected output format is subsequently deleted. Continuous with header per file (0), Continuous with header per session (1), Paged (2). Maximum number of lines to print on a page, including optional header and footer. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TRIMBLE HYDROPRO 2.40




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TRIMBLE HYDROPRO 2.40 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.