Detailed instructions for use are in the User's Guide.
[. . . ] E3TK0FD_EN. book
Page 1
Monday, March 9, 2009 10:00 AM
Introduction Connections
HDD & DVD / VIDEO CASSETTE RECORDER
RDXV49DTKF
OWNER'S MANUAL
PAL SECAM
Basic Setup / TV View Operation Recording Playback Editing Function Setup
OPEN/CLOSE
VHS Functions
ON/STANDBY
VCR REC
DUBBING
VCR
HDD
DVD
HDD
DVD
Others
© 2009 Toshiba Corporation
EN
For Customer Use: Carefully read the Model No. __________________________
1
E3TK0FD_EN. book
Page 2
Monday, March 9, 2009 10:00 AM
.
Introduction
Precautions
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The important note is located on the rear of the cabinet.
Laser Safety
This unit employs a laser. [. . . ] · Make sure that the videotape has enough space to record the contents. Preparing for dubbing (DVD to VHS): · Insert a disc to be dubbed.
One Touch Dubbing
Video VR
HDD
DVD-RW
DVD-RW
DVD-R
VHS DVD+RW DVD+R You can start dubbing right away with just one touch.
One Touch Dubbing between HDD and DVD
If you want to record a title in the HDD, press [HDD] first. If you want to record a title in a disc, press [DVD] first.
During playback of the title you want to dub, press [DUBBING].
If you are playing back an HDD, HDD to DVD dubbing will start right away. If you are playing back a DVD, DVD to HDD dubbing will start right away. (HDD to DVD only) During playback of the title you want to dub, press [DUBBING HDD M DVD] on the front panel. Press [STOP C] for 2 seconds on the remote control.
Note
· When dubbing from DVD to HDD, only One Touch Dubbing will be available for finalised DVD-R, video mode DVD-RW or DVD+R. · The dubbing will start from the beginning of the title being played back. · If the title was in the resume stop mode, the dubbing will start from the beginning to the end of the resume stopped title. · When dubbing from HDD to DVD or VR mode DVD-RW to HDD, recording mode will automatically be set to "High" whenever the conditions are met. (See page 41. ) · If the high speed dubbing is not available, the title will be dubbed in normal speed with the recording mode of the title. · If the title is recorded in other brand's DVD recorder, the title will be dubbed in normal speed with the recording mode that you set with [REC MODE]. · If there is not enough space left on the disc for high/normal speed dubbing with the title's recording mode, the title will be dubbed in normal speed with "Auto" mode. If there is not enough space left on the disc for normal speed dubbing with SLP mode, the title will be dubbed in normal speed with SLP mode until the space of the disc runs out. · If you press [DUBBING HDD M DVD] on the front panel in stop mode without selecting any title, the unit will start dubbing the last title in the Original List or the Playlist. It will start dubbing the title in the Original List if the Original List was the last selected list. It will start dubbing the title in the Playlist if the Playlist was the last selected list.
42
EN
E3TK0FD_EN. book
Page 43
Monday, March 9, 2009
10:00 AM
One Touch Dubbing from VHS to DVD
Selected Title Dubbing
Video VR
Introduction
HDD DVD+RW
DVD-RW DVD+R
DVD-RW
VHS
DVD-R
If you want to record a title in the videotape, press [VCR] first.
1 2 3
Press [PLAY B] to start the playback of the videotape you want to dub. Press [DUBBING VCR M DVD] on the front panel.
The dubbing will start from there to the end.
1 2
In stop mode, press [SETUP].
Connections
Select "Dubbing" using [K \ L], then press [ENTER\OK].
Setup General Setting Timer Programming
Basic Setup / TV View Operation
Title List DVD Menu HDD Menu Dubbing
To stop the dubbing in progress: Press [STOP C] on the front panel. Press [STOP C] for 2 seconds on the remote control.
Note
· When dubbing starts, the video image may be distorted because of the Digital Tracking function. Play the videotape until the image clears up and then start the dubbing. HDD to DVD / DVD to HDD / HDD to VHS / DVD to VHS
Recording
3
Select your desired dubbing direction using [K \ L], then press [ENTER\OK]. (Refer to "VHS to HDD / DVD" on page 44. )
e. g. ) HDD A DVD
Dubbing
One-Title Dubbing between HDD and DVD
Video VR
Playback
HDD
DVD-RW
DVD-RW
DVD-R
DVD+RW DVD+R This function lets you select one specific title from the title list for dubbing.
HDD DVD HDD VCR DVD VCR
DVD HDD VCR HDD VCR DVD
Editing
If you want to dub a title in the HDD, press [HDD] first. If you want to dub a title in a disc, press [DVD] first.
4
Select "Add" using [K \ L], then press [ENTER\OK].
HDD DVD
1 2 3
Press [TOP MENU]. [. . . ] (See page 45. ) · Insert a recordable disc with enough recording space. (See page 59. )
80
EN
E3TK0FD_EN. book
Page 81
Monday, March 9, 2009
10:00 AM
Introduction
Error message Recording Error You cannot record more than 99 titles on one disc. (The maximum is 99) Recording Error You cannot record more than 999 chapters on one disc. (The maximum is 999) Recording Error You cannot record more than 49 titles on one disc. [. . . ]