Detailed instructions for use are in the User's Guide.
[. . . ] Timing Record Length (quarter/half/full channels with time stamps and with or without transitional storage) 8/4/2 Mb, 32/16/8 Mb, 128/64/32 Mb per channel. Timing Record Length with Glitch Storage Enabled Half of default main record
length.
Channel-to-channel Skew 1 ns (900 ps typical). Minimum Recognizable Pulse/Glitch Width (single channel) 1 ns (P6410, P6419,
P6450) 1. 25 ns (P6434).
Minimum Detectable Setup/Hold Violation 250 ps. [. . . ] Setup-and-Hold Violation Recognizer Setup Time Range From 8 ns before to 7. 5 ns after clock edge in 125 ps increments. Setup-and-Hold Violation Recognizer Hold Time Range From 7. 5 ns before to 8 ns after clock edge in 125 ps increments. MagniVuTM Trigger Position MagniVu position can be set from 0% to 60% centered around the MagniVu trigger. Storage Control (data qualification) Global (conditional), by state (start/stop), block, by trigger action, or transitional. Force main prefill selection available.
2
www. tektronix. com
Logic Analyzers -- TLA5000B Series
iViewTM (Integrated View) Capability
Number of Oscilloscopes that can be Connected to a TLA System 1. External Oscilloscopes Supported For a complete list of currently
External Peripheral Interfaces
External Display Port Type Two female DB15 SVGA. External Display Resolution Up to 1600×1200 noninterlaced at 16. 8 M colors. Parallel Interface Modes Centronics mode, EPP (Extended Parallel Port), ECP
supported oscilloscopes that are supported, please visit our website http://www. tektronix. com/iview. Oscilloscope Connections GPIB, Trigger In, Trigger Out, Clock In (when available) for the GPIB iView cable (Opt 1C). Data Correlation After oscilloscope acquisition is complete, data is automatically transferred to the TLA and time correlated with the TLA acquisition data. Deskew Oscilloscope and TLA data is automatically deskewed and time correlated when using the iView external oscilloscope cable. iView External Oscilloscope Cable Length 2 m.
(Microsoft high-speed mode).
Serial Interface Port Type Male DB9. USB Port Four USB 2. 0.
PC Characteristics
Operating System Microsoft Windows XP Professional with Multilingual User Interface Pack. Optical Drive Internal 24/10/24 CD-RW.
Symbolic Support
Number of Symbols/Ranges Unlimited (limited only by amount of virtual memory
available on TLA).
Object File Formats Supported IEEE695, OMF 51, OMF 86, OMF 166, OMF 286, OMF 386, COFF, Elf/Dwarf 1 and 2, Elf/Stabs, TSF (TSF is a generic ASCII file format documented in the TLA user manual). If a format is not listed, please contact your local Tektronix representative.
Integral Controls
Front-panel Display
External Instrumentation Interfaces
System Trigger Output Asserted whenever a system trigger occurs (TTL-compatible output, back-terminated into 50 ). System Trigger Input Forces a system trigger (triggers all modules) when asserted (TTL-compatible, edge-sensitive, falling-edge latched). External Signal Output Can be used to drive external circuitry from a module's trigger mechanism (TTL-compatible output, back-terminated into 50 ). External Signal Input Can be used to provide an external signal to arm or trigger
Size: 10. 4 in. [. . . ] Safety UL3111-1, CSA1010. 1, EN61010-1, IEC61010-1.
Ordering Information
TLA5201B TLA5202B TLA5203B TLA5204B
34 Channel, 2 GHz Timing with 125 ps MagniVuTM Acquisition, 235 MHz State, 2 Mb Logic Analyzer. 68 Channel, 2 GHz Timing with 125 ps MagniVuTM Acquisition, 235 MHz State, 2 Mb Logic Analyzer. 102 Channel, 2 GHz Timing with 125 ps MagniVuTM Acquisition, 235 MHz State, 2 Mb Logic Analyzer. [. . . ]