Detailed instructions for use are in the User's Guide.
[. . . ] [. . . ] Several accessories appeared progressively: plates and cores CCIR or NAB and a kit to use loops of magnetic tape It left then a model 38 and 19 cm/s CCIR, generalized in the studios and, of course, most interesting, there is a model with 4 tracks stereo (1/4 of track) and a model Dolby B; to avoid both!It is necessary to point out that the Revox A77 is a "dual track" and not a true stereo machine (the difference is in the precise width of each track and the distance between these tracks). DESIGN FEATURES
General principle: Tape speeds:
mechanism with 3 motors, all electronically controlled 19 cm/s (7 1/2 in/s) 9, 5 cm/s (3 3/4 in/s) « ± 0, 08 % @ 19 cm/s « ± 0, 1 % @ 9, 5 cm/s <= 0, 2% maximum 26, 5 cm ( 10 1/2 in ) Horizontal or vertical equipped entirely with transistors with silicon structure double diffusion 30 Hz @ 20 kHz +2/-3 dB 50 Hz @ 15 kHz ± 1 , 5 dB 30 Hz @ 16 kHz +2/-3 dB 50 Hz @ 10 kHz ± 1, 5 dB à 19 cm/s à 9, 5 cm/s ±0, 2 %
Wow and Flutter:
Drift: Diameter of the reels: Position of operation: Amplifiers: Response curve recording-reading:
Harmonic distortion: (maximum level @ 1 kHz) Corrections: Signal ratio/noise: (balanced with filter DC IF) Retreat of cross talk (@ 1 kHz):
<= 2 % @ 19 cm/s <= 3 % @ 9, 5 cm/s recording NAB, commutable reading NAB or IEC >= 58 dB @ 19 cm/s >= 56 dB @ 9, 5 cm/s >= 60 dB, mono >= 45 dB, stereo 120 kHz, push-pull oscillator
Oscillation frequency: Inputs per channel: cinch and jack DIN 5 poles cinch Outputs per channel: DIN 5 poles cinch jack
Microphones commutable LO/HI LOW: 50 @ 600 ohms 0, 15 mV HIGH: 100 kohms 2, 5 mV RADIO: 33 kohms 2, 5 mV AUX: 1 Mohms 35 mV OUTPUT max. 1, 2 V / Ri 2, 5 kohms PHONES ear-phones 200 to 600 ohms all remotely controllable functions by impulses plug-in, delivered on request musical power20 W ( 10 W per channel ) in sinusoidal mode16 W ( 8 W per channel) 4 to 16 ohms
remote Control: Amplifiers of loudspeakers: Power of exit: (load 8 ohms distortion <= 1 %) Output impedance:
Built-in loudspeakers (model bag):
2 loudspeakers per channel (disconnected automatically at the time of the connection of external loudspeakers) 54 transistors, 32 diodes, 4 rectifiers with silicon, 1 photo resistor, 4 relays stabilized 110, 130, 150, 220, 240, 250 V-, 50 and 60 Hz 70 W without the amplifiers of loudspeakers between 70 and 100 W with the amplifiers 0, 5 A for 220 to 250 V 1, O A for 110 to 150 V Approximately 15 kg
Component: (with the amplifiers of loudspeakers) Power supply: Tensions of the network: Consumption:
Fuses: Weight: [. . . ] [. . . ]