User manual STRONG SRT 8115

[. . . ] Digital Terrestrial HD Receiver SRT 8115 User manual Bedienungsanleitung Manuel d’Utilisateur Manuale Utente Manual del usuario Manual do Utilizador Felhasználói kézikönyv Instrukcja obsługi Ръководство на потребителя Picture similar Digital Audio Amplifier PART 1 • English Table of Content 1. 0 Introduction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 Your Receiver 2. 1 DEFAULT PIN: 1234 2. 2 Front Panel 2. 3 Rear Panel 2. 4 Remote Control 3. 0 Connection 3. 1 Connecting to a Terrestrial Antenna 3. 2 Connecting to TV with HDMI cable 3. 3 Connecting to TV with SCART cable 3. 4 Connecting to TV with RCA cable 3. 5 Connecting to a Digital Audio Amplifier with S / PDIF 3. 6 Connecting to a Digital Audio Amplifier and TV using HDMI 3. 7 Connecting a USB storage device 4. 0 Starting up for the first time 5. 0 Quick guide to using your receiver 6. 0 Operation 6. 1 Changing channels 6. 2 Info Banner 6. 3 Selection of audio language 6. 4 Teletext 6. 5 Subtitles 6. 6 Timeshift 6. 7 EPG (Electronic Programme Guide) 6. 8 Instant Recording 7. 0 Main Menu 7. 1 Edit Channel 7. 2 Installation 7. 3 System Setup 7. 4 Tools 7. 5 Games 7. 6 Media 8. 0 Troubleshooting 9. 0 Technical Specifications 26 Apr 2013 16:02 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries, Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. All other product names are trademarks or registered trademarks of their respective owners. [. . . ] (DEFAULT PIN: 1234) 10 PART 1 • English To lock or unlock a channel, press RED while in TV Channel List. The red  on the top of the screen will move up to indicate that the Lock function is selected. (DEFAULT PIN: 1234) Locked channels will be marked with the  symbol. Select Yes to save the changes or No to discard. 7. 1. 1. 3 Skipping channels Channels marked with Skip will be skipped when zapping channels with the pq buttons. The Skip symbol on the top of the screen will move up to indicate that the Skip function is selected. Use pq to select a channel and press OK to mark or unmark it for skipping. Select Yes to save the changes or No to discard. 7. 1. 1. 4 Moving channels To enable the Move function, press YELLOW while in TV Channel List. The Move symbol on the top of the screen will move up to indicate that the Move function is selected. Now you can move the selected channel up or down inside the channel list by using pq. Select Yes to save the changes or No to discard. 7. 1. 1. 5 Editing channels The Edit function allows you to Sort, Rename or Delete channels. If you made changes in the previous menu, but haven’t saved them yet, you will be asked to do so now. Possible methods are: Name (A-Z):  Sorting in alphabetical order from A to Z. All Default:  Sorting by searched Order (from lowest to highest frequency or by LCN numbering). A text field 11 English PART 1 • English will now pop up at the right of the screen. When you have marked all channels you wish to delete, press EXIT twice. Select Yes to delete the marked channels or No to cancel. Basically, the operation of the Radio Channel List is the same as in the TV Channel List. The only difference is that in Radio Channel List there is no video information, so it will always display the radio background on the preview screen. 7. 1. 2 Radio Channel List 7. 1. 3 Delete all Use this menu to delete all stored channels. Inside the confirmation window select Yes with tu and press OK to delete or select No to cancel. Warning!  Delete all function will permanently delete all current channels and all The favourite lists from your receiver, and you are not able to leave the menu until you search for channels again. 7. 1. 4 Rename Favourite list This menu allows you to personalize the names of the 8 available favourite lists. Use pq to select Rename Favourite List from the Edit Channel Menu and press OK to proceed. When all changes have been made, press EXIT twice to leave this menu. 7. 2 Installation 7. 2. 1 Auto Scan Use pq to select Installation and press OK or u to advance. When FTA Only is set to Yes, scrambled channels won’t be stored in the channel list. [. . . ] Please, enter your PIN code to access this menu and press OK to start formatting. 7. 6. 2 HDD Information 18 PART 1 • English Warning!  Formatting will permanently delete ALL data stored on the connected device. Please make a backup copy of all data you wish to keep before entering the HDD Format menu. STRONG cannot be held responsible for loss of data from USB devices used with this receiver. Press OK to proceed, select FAT or Cancel, or press EXIT to leave without formatting. [. . . ]