User manual SONY VPCEG26FX/B

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VPCEG26FX/B. We hope that this SONY VPCEG26FX/B user guide will be useful to you.


SONY VPCEG26FX/B : Download the complete user guide (2114 Ko)

Manual abstract: user guide SONY VPCEG26FX/B

Detailed instructions for use are in the User's Guide.

[. . . ] This appliance is supplied with a moulded three pin mains plug for your safety and convenience. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. [. . . ] ≥ This unit may not function properly if radio waves from a nearby broadcasting station, etc. is too strong. ∫ Intended usage ≥ This unit is for normal, general use only. ≥ Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc). 4 VQT4U45 SC-NE1_EB~VQT4U45. book 5 ページ 2013年1月15日 火曜日 午後8時20分 Control reference guide Top view 1 − VOLUME + SOUND 2 1 4 9 10 11  OK  4 PLAY MENU 5 SETUP 3 5 6 7 8 1 Standby/on switch [Í/I] ([Í]) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. ∫ Before using for the first time Remove the insulation sheet A. 2 3 4 5 6 7 Enter sound menu Enter setup menu Select Bluetooth®/AUX Adjust the volume (0 (min) to 50 (max)) Enter the Bluetooth® menu/ Change the sound input level of the external device (l 6) Mute the sound Mutes the sound. “MUTE” is also cancelled when the volume is adjusted or the unit is turned off. ∫ To replace a button-type battery Battery type: CR2025 (Lithium battery) 1 2 8 9 10 11 Selection/OK Dynamic Bass sound effect selector Display Remote control signal sensor Distance: Within approx. ≥ To avoid interference, please do not put any objects in front of signal sensor. ≥ Set the button-type battery with its (i) mark facing upward. ≥ Keep the button-type battery out of reach of children to prevent swallowing. 5 VQT4U45 SC-NE1_EB~VQT4U45. book 6 ページ 2013年1月15日 火曜日 午後8時20分 Connections Connect the AC mains lead. This unit consumes a small amount of AC power (l 11) even when turned off. ≥ In the interest of power conservation, if you will not be using this unit for an extended period of time, unplug it from the household mains socket. To household mains socket AC mains lead (supplied) READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION. ≥ These speakers do not have magnetic shielding. Do not place them near a television, personal computer or other devices easily influenced by magnetism. ≥ When this unit is turned on for the first time after purchase, a message prompting you to connect a Bluetooth® device (“PAIRING”) is displayed. (l 7) Additional Connection Connect an external music device (for AUX mode). 1 Plug the audio cable (not supplied) into the AUX jack. Plug type: ‰3. 5 mm stereo 2 Press [ , AUX] to select “AUX” and start playback on the connected device. ≥ You want to clear and reset the memory contents. Remote control The remote control doesn’t work properly. ≥ The remote control and this unit are using a different code. (l below, “REMOTE  ”) ≥ Is the battery depleted or is the battery inserted incorrectly?(l 5) Messages The following messages or service numbers may appear on the unit’s display. “AUTO OFF” ≥ The unit has been left unused for about 30 minutes and will shut down within a minute. (Wait for at least 3 minutes before proceeding to step 2. ) 2 While pressing and holding down [Í/I] on the unit, reconnect the AC mains lead. ≥ Keep holding down [Í/I] until “--------” appears on the display. 3 Release [Í/I]. ≥ All the settings are returned to the factory preset. You will need to reset the memory items. “ERROR” ≥ Incorrect operation is performed. Read the instructions and try again. “F  ” (“  ” stands for a number. )  ≥ There is a problem with this unit. Note down the displayed number, disconnect the AC mains lead and consult your dealer. Common problems Humming heard during play. ≥ An AC mains lead or fluorescent light is near the cords. Keep other appliances and cords away from this unit’s cables. “REMOTE  (“  ” stands for a number. ) ” ≥ The remote control and this unit are using different codes. [. . . ] The screws and other items are not supplied as the type and size will vary with each installation. ≥ Refer to step 2 of “Wall mount instructions” for details about the required screws. ≥ Be sure to attach the fall prevention cord as a secondary safety measure. Installation accessories ∫ Supplied accessories ≥ 1 Safety holder ≥ 1 Screw ≥ 2 Wall mount brackets Wall mount instructions Before installation, turn the unit off and disconnect the AC mains lead from the mains socket. ∫ Additionally required accessories (commercially available) ≥ 4 Wall mount bracket fixing screws ≥ 1 Safety holder fixing screw ≥ 1 Fall prevention cord* ≥ 1 Screw eye * Use a cord that is capable of supporting over 33 kg (with a diameter of about 1. 5 mm). ≥ Keep the safety holder out of reach of children to prevent swallowing. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VPCEG26FX/B




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VPCEG26FX/B will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.