User manual SONY VAIO VPC-CW14FX/W

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VAIO VPC-CW14FX/W. We hope that this SONY VAIO VPC-CW14FX/W user guide will be useful to you.


SONY VAIO VPC-CW14FX/W : Download the complete user guide (2913 Ko)

You may also download the following manuals related to this product:

   SONY VAIO VPC-CW14FX/W QUICK START GUIDE (1795 ko)
   SONY VAIO VPC-CW14FX/W DATASHEET (488 ko)
   SONY VAIO VPC-CW14FX/W QUICK START GUIDE (1795 ko)
   SONY VAIO VPC-CW14FX/W HARD DISK DRIVE REPLACEMENT INSTRUCTIONS (289 ko)
   SONY VAIO VPC-CW14FX/W OPTICAL DISK DRIVE REPLACEMENT INSTRUCTIONS (276 ko)

Manual abstract: user guide SONY VAIO VPC-CW14FX/W

Detailed instructions for use are in the User's Guide.

[. . . ] AMD, AthlonTM, AthlonTM XP, ThoroughbredTM, and DuronTM are registered trademarks of AMD Corporation. Intel® and Pentium® are registered trademarks of Intel Corporation. PS/2 and OS ® /2 are registered trademarks of International Business Machines Corporation. W indows ® 95/98/2000/NT /XP/Vis ta are regis tered trademarks of Mic rosof t Corporation. [. . . ] The setting of the field will automatically return to [Enabled] later. CPU Smart FAN Target The mainboard provides the Smart Fan function which can control the CPU fan speed automatically depending on the current temperature to keep it with in a specific range. If the current CPU fan temperature reaches to the target value, the smart fan function will be activated. It provides several sections to speed up for cooling down automaticlly . CPU Min. FAN speed(%) This item allows users to select how percentage of minimum speed limit for the CPU fan. SYS FAN1/2 Control This item allows users to select how percentage of speed for the SYS FAN1. PC Health Status CPU/ System Temperature, CPU FAN/ SYS FAN1/ SYS FAN2 Speed, CPU Vcore, 3. 3V, 5V, 12V, 5V SB These items display the current status of all of the monitored hardware devices/ components such as CPU voltage, temperatures and all fans' speeds. 3-17 M S-7513 M ainboard H/W Monitor Chassis Intrusion The field enables or disables the feature of recording the chassis intrusion status and issuing a warning message if the chassis is once opened. The setting of the field will automatically return to [Enabled] later. CPU Smart FAN Target The mainboard provides the Smart Fan function which can control the CPU fan speed automatically depending on the current temperature to keep it with in a specific range. If the current CPU fan temperature reaches to the target value, the smart fan function will be activated. It provides several sections to speed up for cooling down automaticlly . Advance DRAM Configuration Press <Enter> to enter the sub-menu and the following screen appears. Configuration DRAM Timing by SPD Setting to [Enabled] enables DRAM CAS# Latency automatically to be determined by BIOS based on the configurations on the SPD (Serial Presence Detect) EEPROM on the DRAM module. Select [1N] makes SDRAM signal controller to run at 1N (N=clock cycles) rate. MEMORY-Z Press <Enter> to enter the sub-menu and the following screen appears. DIM M1/2/3/4 Memory SPD Information Press <Enter> to enter the sub-menu and the following screen appears. 3-22 BIOS Setup DIMM 1/2/3/4 Memory SPD Information These items display the current status of the current DIMM Memory speed information such as momory type, max bandwidth, manufacture, part number, serial number, SDRAM cycle time, DRAM TCL, DRAM TRCD, DRAM TRP, DRAM TRAS, DRAM TRFC, DRAM TWR, DRAM TWTR, DRAM TRRD and DRAM TRTP. X. M. P Support Information Press <Enter> to enter the sub-menu and the following screen appears. These items display the current status of the X. M. P support information such as , memory voltage, max bandwidth, SDRAM cycle time, DRAM TCL, DRAM TRCD, DRAM TRP, DRAM TRAS, DRAM TRFC, DRAM TWR, DRAM TWTR, DRAM TRRD and DRAM TRTP. They are read only. 3-23 M S-7513 M ainboard FSB/DRAM Ratio This item will allow you to adjust the FSB/DRAM Ratio of the memory. Adjust PCIE Frequency This field allows you to select the PCIE frequency (in MHz). Auto Disable DIM M/PCI Frequency W hen set to [Enabled], the system will remove (turn off) clocks from empty DIMM and PCI slots to minimize the electromagnetic interference (EMI). CPU Voltage / CPU GTL REF0 / CPU GTL REF1 / DRAM Voltage / DDR_VREF_A/B / NB Voltage / NB GTL REF / VTT FSB Voltage / SB Voltage These items dispaly the power status of Memory, FSB and chipset. Spread Spectrum W hen the motherboard's clock generator pulses, the extreme values (spikes) of the pulses create EMI (Electromagnetic Interference). The Spread Spectrum function reduces the EMI generated by modulating the pulses so that the spikes of the pulses are reduced to flatter curves. [. . . ] W hen you start installing Windows XP and older operating systems, you may encounter a message stating, "Setup could not determine the type of one or more mass storage devices installed in your system". If this is the case, then you are already in the right place and are ready to supply the driver. If this is not the case, then press F6 when prompted at the beginning of W indows setup. Press the "S" key to select "Specify Additional Device". [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VAIO VPC-CW14FX/W




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VAIO VPC-CW14FX/W will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.