User manual SONY VAIO VPC-CA23FX/B
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VAIO VPC-CA23FX/B. We hope that this SONY VAIO VPC-CA23FX/B user guide will be useful to you.
You may also download the following manuals related to this product:
SONY VAIO VPC-CA23FX/B QUICK START GUIDE (1406 ko)
SONY VAIO VPC-CA23FX/B QUICK START GUIDE (1406 ko)
SONY VAIO VPC-CA23FX/B RECOVERY, BACKUP AND TROUBLESHOOTING GUIDE (483 ko)
Manual abstract: user guide SONY VAIO VPC-CA23FX/B
Detailed instructions for use are in the User's Guide.
[. . . ] Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for SONY products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. SONY shall not be liable for technical or editorial errors or omissions contained herein. [. . . ] NOTE: The black WLAN antenna cable is connected to the WLAN module "Main" terminal. The white WLAN antenna cable is connected to the WLAN module "Aux" terminal. If the computer is equipped with an 802. 11a/b/g/n WLAN module, the yellow WLAN antenna cable (2) is connected to the middle terminal on the WLAN module. Remove the two Phillips PM2. 5×3. 0 screws (3) that secure the WLAN module to the computer. (The edge of the module opposite the slot rises away from the computer. )
60
Chapter 4 Removal and replacement procedures
ENWW
3.
Remove the WLAN module (4) by pulling the module away from the slot at an angle. NOTE: WLAN modules are designed with a notch (5) to prevent incorrect installation.
Reverse this procedure to install the WLAN module.
ENWW
Component replacement procedures
61
Optical drive
NOTE: All optical drive spare part kits include an optical drive bezel and optical drive bracket.
Description DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe DVD±RW and CD-RW Super Multi Double-Layer Combo Drive DVD/CD-RW Combo Drive DVD-ROM drive Spare part number 443903-001 443904-001 443901-001 443902-001
Before removing the optical drive, follow these steps: 1. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the memory/WLAN module compartment cover (see Expansion memory module on page 56).
Remove the optical drive: 1. Remove the Torx T8M2. 5×9. 0 screw (1) that secures the optical drive to the computer. Use a flat-bladed tool to push the metal tab (2) toward the left side of the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the memory/WLAN module compartment cover (see Expansion memory module on page 56). Release the keyboard (see Keyboard on page 64).
68
Chapter 4 Removal and replacement procedures
ENWW
Remove the WWAN module: 1. Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module. NOTE: The red WWAN antenna cable is connected to the WWAN module "Main" terminal. The blue WWAN antenna cable is connected to the WWAN module "Aux" terminal. If the computer is equipped with an HSPDA WWAN module, the red WWAN antenna cable is connected to the only terminal on the module. Remove the two Phillips PM2. 5×3. 0 screws (2) that secure the WWAN module to the computer. (The edge of the module opposite the slot rises away from the computer. ) Remove the WWAN module (3) by pulling the module away from the slot at an angle. NOTE: WWAN modules are designed with a notch (4) to prevent incorrect installation.
Reverse this procedure to install the WWAN module.
ENWW
Component replacement procedures
69
Switch cover
Description Switch cover for use with SONY Compaq 6715b and 6710b computer models (includes power button board and cable and LED board and cable) Switch cover for use with SONY Compaq 6715s and 6710s computer models (includes power button board and cable, but does not include LED board and cable) Spare part number 443911-001 443910-001
Before removing the switch cover, follow these steps: 1. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. [. . . ] Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country and region where it will be used. The flexible cord must be Type VCTF, 3-conductor, 0. 75-mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country and region where it will be used.
2.
3.
4.
5.
152 Chapter 11 Power cord set requirements
ENWW
12 Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal.
Display
WARNING! [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VAIO VPC-CA23FX/B
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VAIO VPC-CA23FX/B will begin.