User manual SONY VCT-HM1

[. . . ] For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. We recommend that you attach a strap to the camera and the handlebar to prevent the camera from falling. [. . . ] Some spots, scratches and damage may occur to the mounting equipment due to  vibration, shock, falling, heat, direct sunlight, dirt, fine particles of stone, dust, rain or water, etc. Do not mount it on anything other than  the handlebar of a bicycle. The illustrations in these Operating Instructions may differ from the actual product. ΍) Press and hold the button on the left side of the cradle, and adjust the angle. ΍)  Cradle for bicycle  Mounting cushions (A/B/C, 2 of each) A,  B and C have different grip profile thickness. Mounting cushions A, B, and C have their codes printed in the center of the release paper  side respectively. ŋ在骑车时操作设备。  Adjustment sheets (thick/thin, 1 of each)  Hex wrench Operating Instructions (this document)  Design and specifications are subject to change without notice. Without removing the release paper, attach the mounting cushion to the cradle and determine the appropriate mounting cushion size by attaching temporarily to the handlebar. The code A, B, or C is printed on the outer surface (release paper side) of each mounting cushion respectively. Choose a location that does not interfere with riding operations or bicycle functionality. Note Install a horizontal portion of the handlebar, where thickness is consistent. Référence 检查附带物品（见图 ）  自行车专用托座  安装垫片（A/B/C，各 2 片）  A、B 和 C 有不同的夹紧齿形厚度。  安装垫片 A、B 和 C 分别在各自的离型纸面中央有印码。  Install the cradle on the handlebar. [. . . ] Note Do  not pinch the adjustment sheet or any foreign object under the part marked *. ΍ Adjustment sheet or foreign object should not be pinched at this part. [. . . ]