User manual SONY RM-ED008

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY RM-ED008. We hope that this SONY RM-ED008 user guide will be useful to you.


SONY RM-ED008 : Download the complete user guide (5899 Ko)

Manual abstract: user guide SONY RM-ED008

Detailed instructions for use are in the User's Guide.

[. . . ] 2-697-124-12(1) LCD Digital Colour TV Operating Instructions Before operating the TV, please read the “Safety information” section of this manual. KDL-46W2000 KDL-40W2000 For useful information about Sony products © 2006 Sony Corporation NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 13 AMP FUSE at the distribution board. [. . . ] Displays the Settings menu where most of the advanced settings and adjustments are performed. 22 GB Picture menu You can select the options listed below on the Picture menu. Using MENU Functions Target Inputs Selects whether to apply settings made in the Picture menu to all inputs, or only to the input currently being watched. €œViewing Only”: Applies settings only to the current input. €œCustom”: Allows you to store your preferred settings. Resets all picture settings except “Target Inputs”, “Picture Mode” and ”Display Mode” to the factory settings. Tip “Backlight” is not available when you set “Power Saving” to “High” (page 29). Picture Mode Display Mode Reset Backlight Contrast Brightness Colour Hue Increases or decreases picture contrast. Tip “Hue” can only be adjusted for an NTSC colour signal (e. Continued 23 GB Colour Temperature Adjusts the whiteness of the picture. €œWarm2” gives a redder tint than “Warm1”. Tip “Warm1” and “Warm2” can only be selected when you set “Picture Mode” to “Custom”. €œAuto”: Automatically reduces the picture noise (in analogue mode only). €œHigh”/“Medium”/“Low”: Modifies the effect of the noise reduction. When you set “Picture Mode” to “Custom”, you can set/change these settings. €œReset”: Resets all the advanced video settings to the factory settings. €œBlack Corrector”: Enhances black areas of the picture for stronger contrast. Contrast Enhancer”: Automatically adjusts “Backlight” and “Contrast” to the most suitable settings judging from the brightness of the screen. It will increase the contrast distinction of the darker picture scenes. €œGamma”: Adjusts the balance between bright and dark areas of the picture. €œLive Colour”: Makes colours more vivid and reproduces clear skin tones. “Colour Space”: Changes the colour reproduction gamut. [. . . ] €¢ Connect the TV to the mains, and press 1 on the TV (top side). €¢ If the 1 (standby) indicator lights up in red, press "/1. €¢ Check that the optional equipment is on and press / repeatedly until the correct input symbol is displayed on the screen. €¢ Check the connection between the optional equipment and the TV. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY RM-ED008




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY RM-ED008 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.