User manual SONY KV-32FX66E

[. . . ] Never push objects of any kind into the set as this could result in a fire or electric shock. If any liquid or solid object does fall into the cabinet, do not operate the TV. For your own safety, do not touch any part of the TV, power lead or aerial lead during lightning storms. To prevent fire or shock hazard, do not expose the TV to rain or moisture. [. . . ] On: volume level of the channels will stay the same, independent of the broadcast signal (e. If you are listening to the TV through headphones, the "Effect" option will automatically be switched to "Off". **This TV has been designed to create the "Dolby Surround" sound effect by simulating the sound of four speakers with two speakers, when the broadcast audio signal is Dolby Surround encoded. The sound effect can also be improved by connecting a suitable external amplifier (for details refer to "Connecting to external audio Equipment" on page 21). SLEEP TIMER The "Sleep Timer" option in the "Features" menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: after selecting the option press , then press or to set the time period delay (max. While watching the TV, you can press the button on the remote control to display the time remaining. ⷠOne minute before the TV switches itself into standby mode, the time remaining is displayed on the TV screen automatically. Then press or to select On (if you wish the TV set to automatically switch the screen format according to the broadcast signal) or Off (if you wish to keep your preference). Even if you have selected "On" or "Off" in the "Auto Format" option, you can always modify the format of the screen by pressing repeatedly on the remote control to select one of the following formats: Smart: Imitation of wide screen effect for 4:3 broadcast. In "Smart", "Zoom" and "14:9" modes, parts of the top and bottom of the screen are cut off. The following option is only available depending on the country you have selected in the "Language/Country" menu. RGB CENTRING When connecting an RGB source, such as a "PlayStation", you may need to readjust the horizontal position of the picture. If this is the case, you can adjust it through the "RGB Centring" option in the "Detail Set Up". Then press or to adjust the centre of the picture between ­10 and +10. The index page of the teletext service (usually page 100) gives you information on how to use the service. to operate teletext , use the remote control buttons as indicated below. Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal. To switch on Teletext : After selecting the TV channel which carries the teletext service you wish to view, press . To select a Teletext page: Input 3 digits for the page number, using the numbered buttons. ⷠIf you make a mistake, retype the correct page number. ⷠIf the counter on the screen continues searching, it is because the page is not available. [. . . ] Press the Media Selector button on the remote control repeatedly until the required green light (VCR or DVD) is lit. Before the green light goes out, press and hold the yellow button for approximately 6 seconds until the green light starts flashing. Whilst the green light is flashing, enter all three digits of the code for your brand of VCR or DVD using the number buttons on the remote control. If your selected code is entered correctly, all three green lights will be lit momentarily. [. . . ]