User manual SONY ICF-M33RDS

[. . . ] â· Since a strong magnet is used for the speaker, keep personal credit cards using magnetic coding or spring-wound watches away from the unit to prevent possible damage from the magnet. â· When the casing becomes soiled, clean it with a soft cloth dampened with mild detergent solution. Never use abrasive cleansers or chemical solvents, as they may mar the casing. [. . . ] Repeated pressing of BAND changes the band in the following order: You can set the unit to display the name of the tuned-in station. An EON network consists of a group of stations whereby a listener, who is tuned in to a participating station using a RDS compatible radio, can automatically receive RDS data transmitted by other stations in the network. Automatic search and switch to a frequency with SEARCH a relatively stronger signal for a station broadcasting on multiple frequencies. * Both FM1 and FM2 refer to the same FM waveband and are differentiated solely to enable more than one station to be assigned to a preset button. The CT function of the RDS enables the built-in clock of the unit to automatically synchronize with CT data being transmitted. Quartz-controlled PLL (Phase Locked Loop) synthesizer system using a microcomputer for easy pinpoint tuning. Turn TUNE/TIME SET upward or downward until you locate the frequency of your desired station. â· The RDS function of this radio will not be activated if the tuned-in FM station does not transmit RDS data. The function may also not work properly in areas where RDS transmissions are in an experimental stage. The ALTERNATIVE SEARCH function enables the unit, through AF (List of Alternative Frequencies) data, to locate another frequency with a stronger signal, and to automatically switch to that frequency. This activates the CT function and " " starts to flash in the display. When the current time is synchronized, " " stops flashing and remains in the display. ) Power output: 90 mW (at 10% harmonic distortion) Output: @ (earphone) jack (minijack) Power requirements: 3 V DC, two R6 (size AA) batteries DC IN 3 V jack accepts: Sony AC-E30HG AC power adaptor (not supplied) Dimensions: Approx. Batteries Design and specifications are subject to change without notice. Recommended accessory AC power adaptor AC-E30HG The voltage of power supply is different depending on the country. Please buy an AC power adaptor suitable in the country where the radio is to be used. [. . . ] If a frequency with RDS data is detected, the unit switches to that frequency. If RDS data is not detected, the unit reverts to the frequency initially tuned in. When you operate your unit while the light is on, the light stays on for longer than 10 seconds. [. . . ]