User manual SONY ICD-80

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY ICD-80. We hope that this SONY ICD-80 user guide will be useful to you.


SONY ICD-80 : Download the complete user guide (1583 Ko)

You may also download the following manuals related to this product:

   SONY ICD-80 カード (107 ko)
   SONY ICD-80 (1585 ko)
   SONY ICD-80 annexe 1 (1585 ko)
   SONY ICD-80 DATASHEET (413 ko)

Manual abstract: user guide SONY ICD-80

Detailed instructions for use are in the User's Guide.

[. . . ] Message 1 Message 2 Newly recorded message Blank space 1 Note on recording Noise may be recorded if an object, such as your finger, etc. , accidentally rubs or scratches the unit during recording. Press DISPLAY/MENU for more than 1 second until "MODE" appears in the display window. or >+ to select "SENS" and press NxPLAY/STOP. 1 Replacing the batteries 2 Slide and lift the battery compartment lid. The battery indicator in the display window shows the battery condition. When flashes, the batteries are exhausted and the unit will stop operation. 22 hours recording/11 hours playback in the SP and LP modes is possible. [. . . ] · If you press zXREC/PAUSE after you have recorded 99 messages, "FULL" will flash with an alarm sound. Select another folder or erase some of the messages. After playing back one message, the unit stops at the beginning of the next message. When the continuous play function is set to "ON" (see the reverse side), the unit stops after playing all messages in a folder. When the last message on a folder has been played back, the unit stops at the beginning of the last message. For private listening Connect an ear receiver or headphones (not supplied) to the i (earphone) jack. ("VOR" is displayed in the display window. ) 1 Press ­ . or >+ to select the digits of the hour. 2 4 Press NxPLAY/STOP at the time signal. or >+ to select "FOLDER" and press NxPLAY/STOP. You cannot record messages up to the maximum recording time. · If you record messages in a mixture of HQ, SP and LP modes, the recordable time varies from the maximum HQ mode recording time to the maximum LP mode recording time. · No more recording can be made when 99 messages each have been recorded in a folder. · Due to the limitation of the IC recording system, this unit records in the minimum recording unit. If the length of each message cannot be divided by the minimum recording unit, the remaining recording time may decrease by more than the total length of the messages. The minute digits will flash. 3 5 Press xSTOP to exit from the menu mode. · Alarm setting will not be cancelled when the alarm playback finishes. To cancel alarm setting, see below. Turning off the Beep Sound A beep will sound to indicate that operation has been accepted. BEEP ON: Precautions On power · Operate the unit only on 3 V DC. On safety · Do not operate the unit while driving, cycling or operating any motorized vehicle. On handling · Do not leave the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. · Should any solid object or liquid fall into the unit, remove the batteries and have the unit checked by qualified personnel before operating it any further. On noise · Noise may be heard when the unit is placed near an AC power source, a fluorescent lamp or a mobile phone during recording or playback. · Noise may be recorded when an object, such as your finger, etc. , rubs or scratches the unit during recording. On maintenance · To clean the exterior, use a soft cloth slightly moistened in water. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. 1 Erasing messages one by one When a message is erased, the remaining messages will advance and renumbered so that there will be no space between messages. Before erasing Message 1 Message 2 Message 3 Message 4 Message 5 Select the folder (See "Selecting the Folder" on the front side) and display the message you want to play back with an alarm. [. . . ] When a plug in power type microphone is connected, power is automatically supplied to the microphone from the IC recorder. 4 Press xSTOP to exit the menu mode. The setting becomes effective and the normal screen will be displayed. If the unit is left unoperated for more than 3 seconds, the display will show the current time and the selected recording mode will be displayed. When recording from other equipment 3 While the display is flashing, press ERASE. (micromini-plug (monaural) phone) Audio connecting cable with attenuator (not supplied) EAR, EARPHONE, v or REC OUT mini-plug (stereo or monaural) To cancel the HOLD function Slide the HOLD switch to "OFF" . Note When the HOLD function is activated during recording, cancel the HOLD function first to stop recording. Index to Parts and Controls Main unit MIC (built-in microphone) (microphone) jack OPR (operation) indicator Display window ERASE DISPLAY/MENU DIVIDE xSTOP zXREC (record) /PAUSE ­ . (review/fast backward)/ >+ (cue/fast forward) (SELECT) Speaker * There is a tactile dot beside the control to show the direction to turn up the volume. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY ICD-80




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY ICD-80 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.