User manual SONY FH-B610

[. . . ] • Camera (1) • Rechargeable battery pack NP-BN (1) (This rechargeable battery pack cannot be used with Cyber-shot that are supplied with the NP-BN1 battery pack. ) • Micro USB cable (1) • AC Adaptor AC-UB10/UB10B/UB10C/UB10D (1) • Power cord (mains lead) (not supplied in the USA and Canada) (1) • Wrist strap (1) • Instruction Manual (this manual) (1) GB 2 Owner’s Record The model and serial numbers are located on the bottom. Refer to these numbers whenever you call your Sony dealer regarding this product. _____________________________ WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS -SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet. CAUTION [ Battery pack If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns. • Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it. [. . . ] If malfunctions occur while using the AC Adaptor, disconnect the plug from the wall outlet (wall socket) immediately to disconnect from the power source. • When charging is finished, disconnect the AC Adaptor from the wall outlet (wall socket). • Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied) and AC Adaptor (supplied). • BC-TRN2 battery charger (sold separately) is able to quick-charge the NP-BN rechargeable battery pack supplied with this model. BC-TRN battery charger (sold separately) is not able to quick-charge the NP-BN rechargeable battery pack supplied with this model. x Charging time (Full charge) The charging time is approximately 115 min. using the AC Adaptor (supplied). Note • The above charging time applies when charging a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances. GB 11 x Charging by connecting to a computer The battery pack can be charged by connecting the camera to a computer using a micro USB cable. Note • Note the following points when charging via a computer: – If the camera is connected to a laptop computer that is not connected to a power source, the laptop battery level decreases. – Do not turn on/off or restart the computer, or wake the computer to resume from sleep mode when a USB connection has been established between the computer and the camera. Before turning on/off, or restarting the computer or waking the computer from sleep mode, disconnect the camera and the computer. – No guarantees are made for charging using a custom-built computer or a modified computer. GB 12 x Battery life and number of images that can be recorded and played back Battery life Shooting (still images) Viewing (still images) Shooting (movies) Notes • The above number of images applies when the battery pack is fully charged. memory card • With facing as illustrated, insert the until it clicks into place. GB 14 3 Close the cover. x Memory cards that can be used Memory card Memory Stick PRO Duo A Memory Stick PRO-HG Duo Memory Stick Duo SD memory card B SDHC memory card SDXC memory card For still images a a a a a a For movies a (Mark2 only) a — a (Class 4 or faster) a (Class 4 or faster) a (Class 4 or faster) • In this manual, products in A are collectively referred to as “Memory Stick Duo” media, and products in B are collectively referred to as SD card. x To remove the memory card/battery pack Memory card: Push the memory card in once to eject the memory card. Set the level of background defocus effect when shooting in Background Defocus mode. Select the image size and the quality for still images, panoramic images or movie files. When [HDR Painting] is selected in Picture Effect, sets the effect level. When [Miniature] is selected in Picture Effect, sets the part to focus on. When [Partial Color] is selected in Picture Effect, selects the color to extract. GB 20 Watercolor Effect Illustration Effect EV ISO White Balance Underwater White Balance Focus Metering Mode Cont. Shooting Interval Scene Recognition Soft Skin Effect Smile Shutter Smile Detection Sensitivity Face Detection Anti Blink Movie SteadyShot In-Camera Guide When [Watercolor] is selected in Picture Effect, sets the effect level. When [Illustration] is selected in Picture Effect, sets the effect level. Select the metering mode that sets which part of the subject to measure to determine the exposure. Set to automatically shoot two images and select image in which the eyes are not blinking. Search the camera’s functions according to your needs. GB 21 Viewing Easy Mode Slideshow Send by TransferJet Delete Retouch Picture Effect 3D Viewing View Mode Display Cont. Shooting Group Protect Print (DPOF) Rotate In-Camera Guide Increase the text size on the screen for ease of use. Transfer data by closely aligning two products equipped with TransferJet. [. . . ] • In a location subject to rocking vibration • Near a location that generates strong radio waves, emits radiation or is strongly magnetic place. • In sandy or dusty places Be careful not to let sand or dust get into the camera. This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired. On carrying Do not sit down in a chair or other place with the camera in the back pocket of your trousers or skirt, as this may cause malfunction or damage the camera. Carl Zeiss lens The camera is equipped with a Carl Zeiss lens which is capable of reproducing sharp images with excellent contrast. The lens for the camera has been produced under a quality assurance system certified by Carl Zeiss in accordance with the quality standards of Carl Zeiss in Germany. Notes on the screen and lens The screen is manufactured using extremely high-precision technology so over 99. 99% of the pixels are operational for effective use. [. . . ]