User manual SMEG JLFSEC608

[. . . ] JLFSEC608 JLFSEC610 Multi function cooker Instruction manual Important safety information Thank you for purchasing this appliance. This manual is an integral part of the appliance and therefore must be kept in its entirety and in an accessible place for the whole working life of the cooker. Please read the instructions and warnings carefully before use to ensure safe and satisfactory operation of this product. Installation must be carried out by qualified personnel in accordance with the regulations in force. [. . . ] After set-up, to see the cooking time remaining, press the "cooking period" key; to see the end of cooking time press the "end time" key. At the end of automatic cooking When cooking is over, the oven will automatically switch off and, at the same time, an intermittent alarm will sound. They can be manually deactivated by pressing the "cooking period" key and "end time" key together. To switch off the appliance, rotate all the knobs to `0' position. To set the oven to start and finish at preset times: Use this function to start and finish cooking automatically. For example, the recipe may require 50 minutes cooking time and it will be ready at 20:00. In this case the programmer will calculate the start time to be at 19:10 and will start and end automatically. 1 Press the "cooking period" key, the display lights up, showing 00:00. The `A' simbol will appear on the display, and the current clock time will be shown. Press the "end time" key, the display lights up, showing the current time. The `A' simbol 15 Erase of set data Once the programmer has been set, press the key of the function to be cancelled. Time cancellation will be considered as end of cooking time by the programmer. Adjusting alarm volume The acoustic alarm has three different settings. These can be operated, while the alarm is sounding , by pressing the key. Use of the hob Cooking hob control knob The appliance features 4 cooking zones of different diameter and power. Their position is clearly indicated by circles and the heat given off is defined by the markings on the glass surface. The 4 cooking zones are of the HIGH-LIGHT type and come on after a few seconds of being activated. Heating intensity can be adjusted by means of the knobs located on the front panel from a minimum to a maximum. The cooking zones marked by two concentric circles and by a circle + fishkettle feature double heating either within the inner circle or both circles. When using for the first time, it is advisable to heat up the cooking hob to its maximum temperature for enough time so as to burn off any possible oily manufacturing residues, the smell of which could otherwise be absorbed by the food. Normal heating: using these knobs it is possible to control the cooking zones of the hob. The drawing to the left refers to the knob of the the back left cooking zone. Push and turn the knob to the right to adjust the power of the burner from the lowest to the highest. To turn the burner off turn the knob to O position. 16 Double heating, using these knobs it is possible to control the double cooking zones of the hob. The heating within the smaller circle is adjusted in the same way as a cooking zone with normal heating. To activate heating in the outside zone, turn the knob clockwise, lining up with the or symbol. Releasing the knob will return it to the maximum position for both the zones (inside + outside). [. . . ] Depending on the type of installation, this appliance belongs to class 2, subclass1 (Fig. It may be installed next to walls, one of which must be higher than the appliance, at a minimum distance of 50 mm from the side of the appliance, as shown in figures A and C relative to the installation classes. Any wall units must be at a distance of at least 750 mm above the appliance. This distance can be reduced to 650 mm if a ventilation hood is installed. Electrical connection Caution! [. . . ]