User manual SMC WTK-G

[. . . ] Quick Installation Guide Package Contents Package Conten ackage Con ents System Requirements After unpacking the SMCWTK-G EZ ConnectTM g 2. 4GHz 802. 11g Wireless Traveler's Kit, check the contents of the box to be sure you have received the following components: · 1 SMCWTK-G device · 1 USB Cable · 1 Power Adapter · 1 Cat-5 Ethernet Cable · 1 EZ Installation Wizard and Documentation CD Explorer · 1 Quick Installation Guide Hardware Description Hardware De cription Hardware Description g the EZ Installation Wizard Remote 2 Get Connected SMCWTK-G is another innovative solution brought to you by SMC. It is the industry's first compact All-in-One device that fits in a convenient easy-to-carry case. [. . . ] That way the networks are wirelessly connected without the need of expensive cabling. EZ ConnectTM g Wireless Traveler's Kit Quick Installation Guide S Package Contents System Requiremen em Requirements Requirements Hardware Description · Wizard allationInternet Explorer/Netscape Navigator 5. 0 or higher · PC running Windows 98SE/ME/2000/XP Package Contents · CD-ROM drive · An AC power outlet or an available USB port to supply power to the Remote Explorer SMCWTK-G Unpack · An available RJ-45 port on a 10/100 Mbps Ethernet Requirements hub or switch Netscape System 2 1 Features Features atur Get Connected and 802. 11g-Compliant · IEEE 802. 11b, · High Data Rates at up to 54 Mbps · EZ Installation Wizard · Plug-and-Play, no drivers needed · USB powered, no power adapter is needed · All-in-one compact device · Supports 5 different modes ­ Access Point, Ethernet Bridge, Repeater, Point-to-Point Bridging, and Point-to-Multipoint Bridging · Personal Access Point mode · 802. 11g Wireless Ethernet Bridge converts any Ethernet-equipped device to wireless · Repeater function (via WDS) extends the range of your wireless network · Point-to-Point Bridging, and Point-to-Multipoint Bridging connects remote workgroup easily · Supports highly secure wireless connections EZ ConnectTM g Wireless Traveler's Kit Quick Installation Guide Disable HTTP Proxy · Another IEEE 802. 11b or 802. 11g compliant device installed on your network such as the BarricadeTM g Wireless Broadband Router with USB Print Server (SMC2804WBRP-G) or another wireless adapter such as the EZ ConnectTM Configuring your Macintosh g Wireless Cardbus Adapter (SMC2835W) 3 Begin 2 Get Connected 1 Unpack SMCWTK-G Configure TCP/IP Settings From U. S. A. and Canada Configure (24 Barricade g 7 days a week) the hours a day, (800) SMC-4-YOU; Phn: (949) 679-8000; Fax: (949) 679-1481 From Europe : Contact details can be found on www. smc-europe. com or www. smc. com http://www. smc. com/ http://www. smc-europe. com/ If you are looking for further contact information, please visit www. smc. com or www. smc-europe. com. Remote 3 Begin SMCWTK-G SMCWTK-G INTERNET E-mail addresses: techsupport@smc. com european. techsupport@smc-europe. com Driver updates: http://www. smc. com/index. cfm?action=tech support drivers downloads 38 Tesla Irvine, CA 92618 Phone: (949) 679-8000 Model Number: SMCWTK-G EZ ConnectTM g Wireless Traveler's Kit Quick Installation Guide Ins allation Using the EZ Installation Wizard sing Ins allation Wizard Wizar The installation method makes the process as simple as possible. Plug in the 4V power supply or use the supplied USB cable to Netscape plug into an available USB port on the PC. Configuring your Macintosh Package Contents System Requirements 5. Go to "Start", then "Programs", select "SMC 802. 11g Wireless Traveler's Kit", and then "SMC 802. 11g Wireless Traveler's Kit Configuration Utility" to start the SMCWTK-G Scan/Configuration Utility Program. tTM g Wireless Kit Quick Installation Guide 2 1 Get Connecte Configure TCP/IP Settings Configure the Barricade g Remote 6. The Scan/Configuration automatically scans for SMCWTK-G on the network. Unpack SMCWTK-G Begin 4. Select "Install Utility". SMCWTK-G SMCWTK-G SMCWTK-G SMCWTK-G 7. Highlight the SMCWTK-G that you would like to configure and click "Configure". If your PC has the same IP address subnet range as the SMCWTK-G, then the login screen will appear. The username is "admin" and the password is "smcadmin". From Scan/Configuration Utility, select the SMCWTK-G that you would like to configure and click "Configure". You will be asked to enter the username and password to configure the SMCWTK-G. By default, the username is "admin" and the password is "smcadmin". Configure the applicable properties for that mode, such as the SSID, Channel, and Security. [. . . ] SMC is a registered trademark; EZ Connect and Barricade are trademarks of SMC Networks, Inc. Other product and company names are trademarks or registered trademarks of their respective holders. [. . . ]