User manual SIMRAD PROCESSOR UNIT OUTLINE SCHEMA REV A
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SIMRAD PROCESSOR UNIT OUTLINE. We hope that this SIMRAD PROCESSOR UNIT OUTLINE user guide will be useful to you.
Manual abstract: user guide SIMRAD PROCESSOR UNIT OUTLINESCHEMA REV A
Detailed instructions for use are in the User's Guide.
[. . . ] Improper use or maintenance may cause damage to the equipment and/or injury to personnel. The user must be familiar with the contents of the appropriate manuals before attempting to install, operate or work on the equipment. Kongsberg Maritime AS disclaims any responsibility for damage or injury caused by improper installation, use or maintenance of the equipment.
Support
If you require maintenance on your Fish finding sonar system contact your local dealer. On the web site you will also find a list of our dealers and distributors.
S im r a d
Ko n g s b e r g M a r it im e A S S t ra n d p rom e n a d e n 5 0 P. [. . . ] The computer is based on a commercial design, but the software and hardware has been specified and assembled by Simrad to suit the PROCESSOR UNIT OUTLINE sonar requirements. The computer holds a DVD player to be used for future software upgrades. Figure 2 Processor Unit
6
337405/A
Simrad PROCESSOR UNIT OUTLINE
This computer serves several functions. It performs the advanced signal processing required to present the information on the display, and it allows you to control the sonar. It provides the graphic presentation of the sonar modes and the images created, it holds the menu system, it communicates with the Transceiver Unit, and reads information from peripheral units.
Operating Panel power supply
A small power supply is implemented to provide stand-by power to the Operating Panel. The power supply is connected to the Processor Unit.
Sonar room units
Transceiver Unit
The PROCESSOR UNIT OUTLINE Transceiver Unit is located in the sonar room, close to the Hull Unit. The transceiver performs the transmission and reception control of the 480 transmitters and 480 receiver channels. A dedicated power supply is provided to supply the required DC voltages to the transceiver. One Ethernet cable is used for communication with the Processor Unit in the wheelhouse, and a second Ethernet cable is used to control the hull unit. The transducer cables from the hull unit are plugged into the side wall of the Transceiver Unit cabinet using a special plug. The Transceiver Unit is mounted on the bulkhead using powerful shock absorbers. If you click
on the middle of the button you will open a dedicated menu for mode selection. If you click on the right or left side of the button you can scroll through the available modes. Each menu holds
one or more buttons.
Button: Click on a button to change the applicable
parameter. If you click on the middle of the button you will normally open a dedicated parameter dialog for parameter selection. If you click on the right or left side of the button you can scroll through the available choices. F
Parameter dialog: When you click a button, the
relevant parameter dialog opens at the bottom of the menu. In this example you can see the Status dialog, which is replaced when a parameter dialog is opened.
14
337405/A
Operating panel
OPERATING PANEL
The most frequently used functions are directly accessible by the designated control buttons on the Operating Panel, and may enter operational commands directly. Most sonar functions are also accessible and activated using the menu system on the display and the trackball and Select button on the Operating Panel. Figure 9 Operating panel
A B C D E F G H I
Main switch: Power the sonar on (and off), lower the
transducer
Symbol: Control the target markers providing exact latitude
and longitude positioning.
Mode: Select your favourite display mode or user setting
with the push on a button.
Gain: Separate gain control for vertical and horizontal sonar
presentation.
Range: Separate range control for vertical and horizontal
sonar presentation.
Cursor: Menu and cursor control. Tilt: Easy control of the sonar's tilt angle, or start automatic
search program.
Various: Store interesting screen captures, and zoom in on
details.
Train: Manual control of beam training, start automatic
search and tracking programs.
337405/A
15
Simrad PROCESSOR UNIT OUTLINE
EXAMPLES
This page presents several screen captures taken from actual operations on fishing vessels. Figure 10 1200 meters
This screen capture shows schools on port side at 1200 meters range. [. . . ] · Production drawings: PROCESSOR UNIT OUTLINE Sonar trunk production on page 36
Installation trunk
· · · ·
Total height: 920 mm Flange diameter: 370 mm Trunk diameter: 273 mm Outline dimensions:
PROCESSOR UNIT OUTLINE Sonar trunk dimensions on page 35.
20
337405/A
Technical specifications
· Production drawings: PROCESSOR UNIT OUTLINE Blind cover dimensions on page 38.
Environmental specifications
This section provides the technical specifications and requirements related to the environmental conditions.
Processor Unit
· Operational temperature: 0 +50°C · Storage temperature: -40 +70°C · Humidity, non-condensing: 5 95%
Operating panel
· Operational temperature: 0 +50°C · Storage temperature: -40 +70°C · Humidity, non-condensing: 5 95%
Operating Panel power supply
· Operational temperature: 0 +50°C · Storage temperature: -40 +70°C · Humidity, non-condensing: 5 95%
Colour Monitor
· Not applicable. Refer to the documentation provided by the manufacturer.
Transceiver Unit
· Operational temperature: 0 +50°C · Storage temperature: -40 +70°C · Humidity, non-condensing: 5 95%
Power Supply Unit
· Operational temperature: 0 +50°C · Storage temperature: -40 +70°C · Humidity, non-condensing: 5 95%
Hull Unit
· Operational temperature: 0 +50°C · Storage temperature: -20 +70°C · Humidity, non-condensing: 5 95%
337405/A
21
Simrad PROCESSOR UNIT OUTLINE
Performance specifications
This section provides the performance specifications for the Simrad PROCESSOR UNIT OUTLINE.
Operational frequency
· 114 kHz
Operational range
· Range steps: 50 to 2000 meters in 10 steps
Tilt and tip functionality
· Tilt: +10 to -60° in 1° steps · Tip: +10 to -90°
Transmitter
· Number of transmitter channels: 480 · Transmission modes: 360° omnidirectional 180° vertical · Pulse modes: CW (Continuous wave) FM ("Chirp" FM)
Receiver
· Number of receiver channels: 480 · Digital filters: TVG (Time Varied Gain) AGC (Automatic Gain Control) RCG (Receiver Controlled Gain) Ping-to-Ping Filter Noise filter FM Correlation filter
Echo presentations
· · · ·
Number of colours: 16 or 64 Display resolution: 1280 x 1024 pixels Colours: Weak, Normal or Strong Palettes: Choice of colour palettes to fit ambient light
conditions
Transducer
· Shape: Cylindrical
22
337405/A
Technical specifications
· Number of individual elements: 480
Beams
· Horizontal transmission: 360 degrees · Horizontal reception: 8 degrees · Vertical transmission: 7, 5 degrees · Vertical reception: 7, 5 degrees · Vertical resolution (transmission + reception): 5, 5 degrees
Beamwidth
· User selected: Narrow, Normal or Wide
Stabilisation
· Roll stabilisation: Automatic, ±20 degrees · Pitch stabilisation: Automatic, ±20 degrees
Interface capabilities
· Four serial lines · RAW data output for scientific research (Ethernet) [Optional] · Scientific output (Ethernet) [Optional] · Additional serial lines [Optional]
337405/A
23
Simrad PROCESSOR UNIT OUTLINE
DRAWING FILE
This chapter contains the installation and outline dimension drawings for the Simrad PROCESSOR UNIT OUTLINE Fish finding sonar.
Note
The mechanical drawings are for information and guidance only. The original installation drawings are available on PDF and/or AutoCad's DWG format. Visit www. simrad. com to download.
Cabinet outline dimension drawings
· Transceiver Unit dimensions on page 25 · Power Supply Unit dimensions on page 28 · Processor Unit dimensions on page 30 · Operating Panel dimensions on page 33
Hull unit outline dimension drawings
· PROCESSOR UNIT OUTLINE Hull unit dimensions on page 34 · PROCESSOR UNIT OUTLINE Sonar trunk dimensions on page 35 · PROCESSOR UNIT OUTLINE Sonar trunk production on page 36 · PROCESSOR UNIT OUTLINE Blind cover dimensions on page 38
24
337405/A
Drawing file
Transceiver Unit dimensions
Forward view
337405/A
25
Simrad PROCESSOR UNIT OUTLINE
Side view
26
337405/A
Drawing file
Top view
337405/A
27
Simrad PROCESSOR UNIT OUTLINE
Power Supply Unit dimensions
Forward view
28
337405/A
Drawing file
Side view
337405/A
29
Simrad PROCESSOR UNIT OUTLINE
Processor Unit dimensions
Forward view
30
337405/A
Drawing file
Side view
337405/A
31
Simrad PROCESSOR UNIT OUTLINE
Footprint
32
337405/A
Drawing file
Operating Panel dimensions
337405/A
33
Simrad PROCESSOR UNIT OUTLINE
PROCESSOR UNIT OUTLINE Hull unit dimensions
34
337405/A
Drawing file
PROCESSOR UNIT OUTLINE Sonar trunk dimensions
5
920
20
5
12. 50 273
Material: Mild steel, St. 42 or better
ø18
0. 3
12 Holes, spacing 30 degrees
ø330
ø37 0
337405/A
35
Simrad PROCESSOR UNIT OUTLINE
PROCESSOR UNIT OUTLINE Sonar trunk production
Side view
36
337405/A
Drawing file
Top view
337405/A
37
Simrad PROCESSOR UNIT OUTLINE
PROCESSOR UNIT OUTLINE Blind cover dimensions
38
337405/A
Company profile
COMPANY PROFILE
Simrad
Simrad is the world's most recognized brand in professional fish finding and fishery research equipment. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SIMRAD PROCESSOR UNIT OUTLINE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SIMRAD PROCESSOR UNIT OUTLINE will begin.