User manual SIMRAD EA RDS QUICK REFERENCE GUIDE REV A
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SIMRAD EA RDS. We hope that this SIMRAD EA RDS user guide will be useful to you.
Manual abstract: user guide SIMRAD EA RDSQUICK REFERENCE GUIDE REV A
Detailed instructions for use are in the User's Guide.
[. . . ] Audio output functionality implemented.
Copyright
©2009 Kongsberg Maritime AS The information contained in this document remains the sole property of Kongsberg Maritime AS. No part of this document may be copied or reproduced in any form or by any means, and the information contained within it is not to be communicated to a third party, without the prior written consent of Kongsberg Maritime AS. The document, or any part of it, may not be translated to any other language without the written approval from Kongsberg Maritime AS.
Disclaimer
Kongsberg Maritime AS endeavours to ensure that all information in this document is correct and fairly stated, but does not accept liability for any errors or omissions.
Warning
The equipment to which this manual applies must only be used for the purpose for which it was designed. Improper use or maintenance may cause damage to the equipment and/or injury to personnel. [. . . ] Observe the following procedure to burn selected sonar images on a blank CD. Do not attempt this while the sonar is in use searching for fish!
Note
This procedure assumes that you have basic knowledge of file management in Windows. Observe that the operating system's auto-start function opens a dialog requesting guidance. By means of normal Windows functions, navigate to the folder d:/winson/screendumps. Click to select the images you wish to burn on the CD, and copy them to the CD's Windows Explorer window. Click Write these files to CD in the Windows Explorer window, and wait until the process has finished. Remove the CD, and close the Windows Explorer window.
To access the operating system functions, you can click any Help button. When the help window opens, you can also access the Taskbar with the Start button.
36
307672/D
Operational procedures
How to copy sonar images to a USB memory stick
The EA RDS Processor Unit is provided with several USB interface ports. These are located on the rear side of the cabinet, and on some models below the CD player under the front cover. Observe the following procedure to copy selected sonar images over to a USB memory stick. Do not attempt this while the sonar is in use searching for fish!
Note
This procedure assumes that you have basic knowledge of file management in Windows. Click the Target track button on the GeoView menu.
40
307672/D
Operational procedures
7 8
Observe that the Target track parameter dialog opens below the menu. Choose the length of the tracking line, and click Close to exit.
User setting procedures
This section explains how to handle user and default settings on the EA RDS sonar.
How to save the current user setting
Observe the following procedure to save the current user settings.
Procedure
1 2
Click the Setup tab to open the menu. Click the User setting button to open the parameter dialog.
3
Click the Save current setting button. The current setting is saved with the default identification name.
How to load a user setting
Observe the following procedure to load a predefined user setting.
Procedure
1 2 3 4 5
Click the Setup tab to open the menu. The selected setting is loaded.
How to rename a user setting
Observe the following procedure to rename a user settings.
Note
In principles you can use any name, but the Mode buttons on the Operator Panel will only choose from User 1, User 2, User 3 and User 4. If you wish to add users, apply names like for example "User 5 Charlie".
307672/D
41
Simrad EA RDS
Procedure
1 2 3 4
Click the Setup tab to open the menu. · Observe that a parameter dialog opens to present the current name. · Observe that an on-line keyboard opens to allow you to enter characters.
5
Place the cursor at the beginning of the current name, and click the Del (Delete) button on the on-line keyboard to remove the characters. Click the necessary characters on the on-line keyboard to build a new name. Click the OK button in the parameter dialog when you have completed the new name. Click the Close button in the User Setting parameter dialog when you have completed the procedure. [. . . ] As it reaches vapour pressure, the water vaporizes and forms small bubbles of gas. When the bubbles collapse, they cause very strong local shock-waves in the water. In addition to this, the cavitation will generate very strong reverberation, commonly seen as a red stripe of echoes behind the vessel. If you have big problems with cavitation, try to adjust the propeller pitch and/or the number of revolutions.
Reverberation
Reverberation is generated when the echoes from your sonar transmission are reflected not only by fish and objects in the water, but also from the bottom and the sea surface. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SIMRAD EA RDS
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SIMRAD EA RDS will begin.